[PATCH 03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards

[Douglas Anderson]

The trackpad interrupt got renamed and also moved to a new GPIO on
newer boards.  Let's do the move in the "trogdor.dtsi" file and then
undo it in the two old boards.

NOTE: since none of the new boards have device trees yet, this change
looks silly on its own but it will make sense after more boards are
supported.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi      | 14 ++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts   | 16 ++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi     | 14 ++++++++------
 3 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 89e5cd29ec09..11269522da50 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -58,8 +58,22 @@ ap_ts: touchscreen@10 {
 	};
 };
 
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
+&trackpad_int_1v8_odl {
+	pinmux {
+		pins = "gpio58";
+	};
+
+	pinconf {
+		pins = "gpio58";
+	};
+};
+
 &ts_reset_l {
 	pinconf {
 		/* This pin is not connected on -rev0, pull up to park. */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2cb522d6962e..bd2c783e0f2f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -68,6 +68,22 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pinmux {
+		pins = "gpio58";
+	};
+
+	pinconf {
+		pins = "gpio58";
+	};
+};
+
 /* PINCTRL - board-specific pinctrl */
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 25ab6572f9cf..4ad27b5c34d1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -642,14 +642,14 @@ ap_tp_i2c: &i2c7 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_int_1v8_odl>;
+		pinctrl-0 = <&tp_int_odl>;
 
 		interrupt-parent = <&tlmm>;
-		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
 		vcc-supply = <&pp3300_fp_tp>;
 
@@ -1410,14 +1410,16 @@ pinconf-rx {
 		};
 	};
 
-	trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+	/* Named trackpad_int_1v8_odl on earlier revision schematics */
+	trackpad_int_1v8_odl:
+	tp_int_odl: tp-int-odl {
 		pinmux {
-			pins = "gpio58";
+			pins = "gpio0";
 			function = "gpio";
 		};
 
 		pinconf {
-			pins = "gpio58";
+			pins = "gpio0";
 
 			/* Has external pullup */
 			bias-disable;
-- 
2.30.1.766.gb4fecdf3b7-goog