Re: [PATCH v2 3/4] arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone

[Doug Anderson]

Hi,

On Thu, Feb 25, 2021 at 10:33 AM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> The trip point configuration of the charger thermal zone for trogdor
> is missing a node for the critical trip point. Add the missing node.
>
> Fixes: bb06eb3607e9 ("arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor")
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - patch added to the series
>
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index bda983da4eaf..ab4efaece5cb 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -22,9 +22,11 @@ charger_thermal: charger-thermal {
>                         thermal-sensors = <&pm6150_adc_tm 1>;
>
>                         trips {
> -                               temperature = <125000>;
> -                               hysteresis = <1000>;
> -                               type = "critical";
> +                               charger-crit {

If you happen to spin for some other reason, it might not hurt to add
a label to this node.  Best case it'll save a patch in the future when
some OEM decides that they need to adjust this temperature and worst
case it doesn't hurt.

In any case:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>