Re: [PATCH 2/2] hwmon: (pmbus): Add driver for Infineon IR36021
From: Guenter Roeck
Date: Sun Feb 28 2021 - 22:07:43 EST
Hi Chris,
On 2/28/21 3:07 PM, Chris Packham wrote:
> The IR36021 is a dual‐loop digital multi‐phase buck controller.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/ir36021.rst | 62 +++++++++++++++++++++++++
> drivers/hwmon/pmbus/Kconfig | 9 ++++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/ir36021.c | 81 +++++++++++++++++++++++++++++++++
> 5 files changed, 154 insertions(+)
> create mode 100644 Documentation/hwmon/ir36021.rst
> create mode 100644 drivers/hwmon/pmbus/ir36021.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 8d5a2df1ecb6..b34894403c2b 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers
> intel-m10-bmc-hwmon
> ir35221
> ir38064
> + ir36021
> isl68137
> it87
> jc42
> diff --git a/Documentation/hwmon/ir36021.rst b/Documentation/hwmon/ir36021.rst
> new file mode 100644
> index 000000000000..36ef8d518b81
> --- /dev/null
> +++ b/Documentation/hwmon/ir36021.rst
> @@ -0,0 +1,62 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver ir36021
> +=====================
> +
> +Supported chips:
> +
> + * Infineon IR36021
> +
> + Prefix: ir36021
> + Addresses scanned: -
> +
> + Datasheet: Publicly available at the Infineon website
> + https://www.infineon.com/dgdl/ir36021.pdf?fileId=5546d462533600a4015355d0aa2d1775
> +
> +Authors:
> + - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> +
> +Description
> +-----------
> +
> +The IR36021 is a dual‐loop digital multi‐phase buck controller designed for
> +point of load applications.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not probe for PMBus devices. You will have to instantiate
> +devices explicitly.
> +
> +Sysfs attributes
> +----------------
> +
> +======================= ===========================
> +curr1_label "iin"
> +curr1_input Measured input current
> +curr1_alarm Input fault alarm
> +
> +curr2_label "iout1"
> +curr2_input Measured output current
> +curr2_alarm Output over-current alarm
> +
> +in1_label "vin"
> +in1_input Measured input voltage
> +in1_alarm Input under-voltage alarm
> +
> +in2_label "vout1"
> +in2_input Measured output voltage
> +in2_alarm Output over-voltage alarm
> +
> +power1_label "pin"
> +power1_input Measured input power
> +power1_alarm Input under-voltage alarm
> +
> +power2_label "pout1"
> +power2_input Measured output power
> +
> +temp1_input Measured temperature
> +temp1_alarm Temperature alarm
> +
> +temp2_input Measured other loop temperature
> +temp2_alarm Temperature alarm
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 32d2fc850621..ee8c27b3b83d 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -84,6 +84,15 @@ config SENSORS_IR35221
> This driver can also be built as a module. If so, the module will
> be called ir35221.
>
> +config SENSORS_IR36021
> + tristate "Infineon IR36021"
> + help
> + If you say yes here you get hardware monitoring support for Infineon
> + IR36021.
> +
> + This driver can also be built as a module. If so, the module will
> + be called ir36021.
> +
> config SENSORS_IR38064
> tristate "Infineon IR38064"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 6a4ba0fdc1db..685a6bc2b15f 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
> obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> +obj-$(CONFIG_SENSORS_IR36021) += ir36021.o
> obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
> obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o
> obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
> diff --git a/drivers/hwmon/pmbus/ir36021.c b/drivers/hwmon/pmbus/ir36021.c
> new file mode 100644
> index 000000000000..99b5c7311afd
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/ir36021.c
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Infineon IR36021
> + *
> + * Copyright (c) 2021 Allied Telesis
> + */
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +static struct pmbus_driver_info ir36021_info = {
> + .pages = 1,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_VOLTAGE_OUT] = linear,
> + .format[PSC_CURRENT_IN] = linear,
> + .format[PSC_CURRENT_OUT] = linear,
> + .format[PSC_POWER] = linear,
> + .format[PSC_TEMPERATURE] = linear,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
> + | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
> + | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
> + | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
> + | PMBUS_HAVE_STATUS_TEMP,
> +};
> +
> +static int ir36021_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + u8 buf[I2C_SMBUS_BLOCK_MAX];
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_BYTE_DATA
> + | I2C_FUNC_SMBUS_READ_WORD_DATA
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
> + return -ENODEV;
> +
> + ret = i2c_smbus_read_i2c_block_data(client, PMBUS_MFR_MODEL, 2, buf);
> + if (ret < 0) {
> + dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
> + return ret;
> + }
> + if (ret != 2 || !(buf[0] == 0x01 || buf[1] == 0x2d)) {
Please use
buf[0] != 0x01 || buf[1] != 0x2d
I am not a friend of double negations and find it confusing.
> + dev_err(&client->dev, "MFR_MODEL unrecognised\n");
> + return -ENODEV;
> + }
> +
> + return pmbus_do_probe(client, id, &ir36021_info);
Please rebase to the latest upstream kernel (parameter change).
> +}
> +
> +static const struct i2c_device_id ir36021_id[] = {
> + { "ir36021", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, ir36021_id);
> +
> +static const struct of_device_id __maybe_unused ir36021_of_id[] = {
> + { .compatible = "infineon,ir36021" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ir36021_of_id);
> +
> +static struct i2c_driver ir36021_driver = {
> + .class = I2C_CLASS_HWMON,
> + .driver = {
> + .name = "ir36021",
> + .of_match_table = of_match_ptr(ir36021_of_id),
> + },
> + .probe = ir36021_probe,
Please use the .probe_new callback.
> + .remove = pmbus_do_remove,
pmbus_do_remove is no longer needed (and does not exist anymore).
Thanks,
Guenter
> + .id_table = ir36021_id,
> +};
> +
> +module_i2c_driver(ir36021_driver);
> +
> +MODULE_AUTHOR("Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("PMBus driver for Infineon IR36021");
> +MODULE_LICENSE("GPL");
>