Re: [PATCH v2 3/3] kernel/smp: add more data to CSD lock debugging

[Peter Zijlstra]

On Mon, Mar 01, 2021 at 11:13:36AM +0100, Juergen Gross wrote:
> In order to help identifying problems with IPI handling and remote
> function execution add some more data to IPI debugging code.
> 
> There have been multiple reports of cpus looping long times (many
> seconds) in smp_call_function_many() waiting for another cpu executing
> a function like tlb flushing. Most of these reports have been for
> cases where the kernel was running as a guest on top of KVM or Xen
> (there are rumours of that happening under VMWare, too, and even on
> bare metal).
> 
> Finding the root cause hasn't been successful yet, even after more than
> 2 years of chasing this bug by different developers.
> 
> Commit 35feb60474bf4f7 ("kernel/smp: Provide CSD lock timeout
> diagnostics") tried to address this by adding some debug code and by
> issuing another IPI when a hang was detected. This helped mitigating
> the problem (the repeated IPI unlocks the hang), but the root cause is
> still unknown.
> 
> Current available data suggests that either an IPI wasn't sent when it
> should have been, or that the IPI didn't result in the target cpu
> executing the queued function (due to the IPI not reaching the cpu,
> the IPI handler not being called, or the handler not seeing the queued
> request).
> 
> Try to add more diagnostic data by introducing a global atomic counter
> which is being incremented when doing critical operations (before and
> after queueing a new request, when sending an IPI, and when dequeueing
> a request). The counter value is stored in percpu variables which can
> be printed out when a hang is detected.
> 
> The data of the last event (consisting of sequence counter, source
> cpu, target cpu, and event type) is stored in a global variable. When
> a new event is to be traced, the data of the last event is stored in
> the event related percpu location and the global data is updated with
> the new event's data. This allows to track two events in one data
> location: one by the value of the event data (the event before the
> current one), and one by the location itself (the current event).
> 
> A typical printout with a detected hang will look like this:
> 
> csd: Detected non-responsive CSD lock (#1) on CPU#1, waiting 5000000003 ns for CPU#06 scf_handler_1+0x0/0x50(0xffffa2a881bb1410).
> 	csd: CSD lock (#1) handling prior scf_handler_1+0x0/0x50(0xffffa2a8813823c0) request.
>         csd: cnt(00008cc): ffff->0000 dequeue (src cpu 0 == empty)
>         csd: cnt(00008cd): ffff->0006 idle
>         csd: cnt(0003668): 0001->0006 queue
>         csd: cnt(0003669): 0001->0006 ipi
>         csd: cnt(0003e0f): 0007->000a queue
>         csd: cnt(0003e10): 0001->ffff ping
>         csd: cnt(0003e71): 0003->0000 ping
>         csd: cnt(0003e72): ffff->0006 gotipi
>         csd: cnt(0003e73): ffff->0006 handle
>         csd: cnt(0003e74): ffff->0006 dequeue (src cpu 0 == empty)
>         csd: cnt(0003e7f): 0004->0006 ping
>         csd: cnt(0003e80): 0001->ffff pinged
>         csd: cnt(0003eb2): 0005->0001 noipi
>         csd: cnt(0003eb3): 0001->0006 queue
>         csd: cnt(0003eb4): 0001->0006 noipi
>         csd: cnt now: 0003f00
> 
> The idea is to print only relevant entries. Those are all events which
> are associated with the hang (so sender side events for the source cpu
> of the hanging request, and receiver side events for the target cpu),
> and the related events just before those (for adding data needed to
> identify a possible race). Printing all available data would be
> possible, but this would add large amounts of data printed on larger
> configurations.
> 
> Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
> Tested-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
> ---
> V2:
> - add automatic data deciphering and sorting of entries
> - add new trace point for leaving flush_smp_call_function_queue()
> - add information when finding an empty call_single_queue

They do not apply on top of these:

  https://lkml.kernel.org/r/20210220231712.2475218-2-namit@xxxxxxxxxx

:-/

> @@ -290,6 +476,19 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(call_single_data_t, csd_data);
>  
>  void __smp_call_single_queue(int cpu, struct llist_node *node)
>  {
> +#ifdef CONFIG_CSD_LOCK_WAIT_DEBUG
> +	if (static_branch_unlikely(&csdlock_debug_extended)) {
> +		unsigned int type;
> +
> +		type = CSD_TYPE(container_of(node, call_single_data_t,
> +					     node.llist));
> +		if (type == CSD_TYPE_SYNC || type == CSD_TYPE_ASYNC) {
> +			__smp_call_single_queue_debug(cpu, node);
> +			return;
> +		}
> +	}
> +#endif

This really ought to be in generic_exec_single(), because there we know
the type matches.