[PATCH net-next v2 1/3] net: ocelot: Add PGID_BLACKHOLE

From: Horatiu Vultur
Date: Tue Mar 16 2021 - 16:16:05 EST


Add a new PGID that is used not to forward frames anywhere. It is used
by MRP to make sure that MRP Test frames will not reach CPU port.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
drivers/net/ethernet/mscc/ocelot.c | 3 +++
include/soc/mscc/ocelot.h | 4 +++-
2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 46e5c9136bac..f74d7cf002a5 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2051,6 +2051,9 @@ int ocelot_init(struct ocelot *ocelot)

ocelot_write_rix(ocelot, val, ANA_PGID_PGID, i);
}
+
+ ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_BLACKHOLE);
+
/* Allow broadcast and unknown L2 multicast to the CPU. */
ocelot_rmw_rix(ocelot, ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)),
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 425ff29d9389..4d10ccc8e7b5 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -51,6 +51,7 @@
*/

/* Reserve some destination PGIDs at the end of the range:
+ * PGID_BLACKHOLE: used for not forwarding the frames
* PGID_CPU: used for whitelisting certain MAC addresses, such as the addresses
* of the switch port net devices, towards the CPU port module.
* PGID_UC: the flooding destinations for unknown unicast traffic.
@@ -59,6 +60,7 @@
* PGID_MCIPV6: the flooding destinations for IPv6 multicast traffic.
* PGID_BC: the flooding destinations for broadcast traffic.
*/
+#define PGID_BLACKHOLE 57
#define PGID_CPU 58
#define PGID_UC 59
#define PGID_MC 60
@@ -73,7 +75,7 @@

#define for_each_nonreserved_multicast_dest_pgid(ocelot, pgid) \
for ((pgid) = (ocelot)->num_phys_ports + 1; \
- (pgid) < PGID_CPU; \
+ (pgid) < PGID_BLACKHOLE; \
(pgid)++)

#define for_each_aggr_pgid(ocelot, pgid) \
--
2.30.1