Re: [PATCH v2 3/3] hwmon: (pmbus): Add driver for BluTek BPA-RS600

[Chris Packham]

On 17/03/21 9:30 am, Chris Packham wrote:
> The BPA-RS600 is a compact 600W AC to DC removable power supply module.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Notes:
>      Changes in v2:
>      - Whitespace and line length cleanup
>      - Add comments about commands that return data but shouldn't be used
>
>   Documentation/hwmon/bpa-rs600.rst |  74 +++++++++++++
>   drivers/hwmon/pmbus/Kconfig       |   9 ++
>   drivers/hwmon/pmbus/Makefile      |   1 +
>   drivers/hwmon/pmbus/bpa-rs600.c   | 172 ++++++++++++++++++++++++++++++
>   4 files changed, 256 insertions(+)
>   create mode 100644 Documentation/hwmon/bpa-rs600.rst
>   create mode 100644 drivers/hwmon/pmbus/bpa-rs600.c
>
>   
> +config SENSORS_BPA_RS600
> +	tristate "BluTek BPD-RS600 Power Supplies"
> +	help
> +	  If you say yes here you get hardware monitoring support for BluTek
> +	  BPD-RS600 Power Supplies.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called bpd-rs600.
> +
I've used BPD here but it should be BPA (A == AC, D == DC). I'll get 
that ready for a v3.