[PATCH] wireless: intel: iwlwifi: fw: api: Absolute rudimentary typo fixes in the file power.h

[Bhaskar Chowdhury]

s/folowing/following/
s/Celsuis/Celsius/
s/temerature/temperature/  ...twice


Signed-off-by: Bhaskar Chowdhury <unixbhaskar@xxxxxxxxx>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/power.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
index 798417182d54..f7c7852127d3 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
@@ -54,7 +54,7 @@ struct iwl_ltr_config_cmd_v1 {
  * @flags: See &enum iwl_ltr_config_flags
  * @static_long: static LTR Long register value.
  * @static_short: static LTR Short register value.
- * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order:
+ * @ltr_cfg_values: LTR parameters table values (in usec) in following order:
  *	TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES
  *	is set.
  * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if
@@ -493,7 +493,7 @@ union iwl_ppag_table_cmd {
  *      Roaming Energy Delta Threshold, otherwise use normal Energy Delta
  *      Threshold. Typical energy threshold is -72dBm.
  * @bf_temp_threshold: This threshold determines the type of temperature
- *	filtering (Slow or Fast) that is selected (Units are in Celsuis):
+ *	filtering (Slow or Fast) that is selected (Units are in Celsius):
  *	If the current temperature is above this threshold - Fast filter
  *	will be used, If the current temperature is below this threshold -
  *	Slow filter will be used.
@@ -501,12 +501,12 @@ union iwl_ppag_table_cmd {
  *      calculated for this and the last passed beacon is greater than this
  *      threshold. Zero value means that the temperature change is ignored for
  *      beacon filtering; beacons will not be  forced to be sent to driver
- *      regardless of whether its temerature has been changed.
+ *      regardless of whether its temperature has been changed.
  * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
  *      calculated for this and the last passed beacon is greater than this
  *      threshold. Zero value means that the temperature change is ignored for
  *      beacon filtering; beacons will not be forced to be sent to driver
- *      regardless of whether its temerature has been changed.
+ *      regardless of whether its temperature has been changed.
  * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
  * @bf_debug_flag: beacon filtering debug configuration
  * @bf_escape_timer: Send beacons to to driver if no beacons were passed
--
2.30.2