RE: [PATCH v6 1/5] misc: Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

Hi Greg,

On Tue, Mar 23, 2021 at 13:0:4, Greg Kroah-Hartman 
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:

> On Fri, Feb 12, 2021 at 06:28:03PM +0100, Gustavo Pimentel wrote:
> > +static const struct attribute_group xdata_attr_group = {
> > +	.attrs = default_attrs,
> > +	.name = DW_XDATA_DRIVER_NAME,
> > +};
> 
> ATTRIBUTE_GROUPS()?

Nicely catched!

> 
> > +static int dw_xdata_pcie_probe(struct pci_dev *pdev,
> > +			       const struct pci_device_id *pid)
> > +{
> > +	const struct dw_xdata_pcie_data *pdata = (void *)pid->driver_data;
> > +	struct dw_xdata *dw;
> > +	u64 addr;
> > +	int err;
> > +
> > +	/* Enable PCI device */
> > +	err = pcim_enable_device(pdev);
> > +	if (err) {
> > +		pci_err(pdev, "enabling device failed\n");
> > +		return err;
> > +	}
> > +
> > +	/* Mapping PCI BAR regions */
> > +	err = pcim_iomap_regions(pdev, BIT(pdata->rg_bar), pci_name(pdev));
> > +	if (err) {
> > +		pci_err(pdev, "xData BAR I/O remapping failed\n");
> > +		return err;
> > +	}
> > +
> > +	pci_set_master(pdev);
> > +
> > +	/* Allocate memory */
> > +	dw = devm_kzalloc(&pdev->dev, sizeof(*dw), GFP_KERNEL);
> > +	if (!dw)
> > +		return -ENOMEM;
> > +
> > +	/* Data structure initialization */
> > +	mutex_init(&dw->mutex);
> > +
> > +	dw->rg_region.vaddr = pcim_iomap_table(pdev)[pdata->rg_bar];
> > +	if (!dw->rg_region.vaddr)
> > +		return -ENOMEM;
> > +
> > +	dw->rg_region.vaddr += pdata->rg_off;
> > +	dw->rg_region.paddr = pdev->resource[pdata->rg_bar].start;
> > +	dw->rg_region.paddr += pdata->rg_off;
> > +	dw->rg_region.sz = pdata->rg_sz;
> > +
> > +	dw->max_wr_len = pcie_get_mps(pdev);
> > +	dw->max_wr_len >>= 2;
> > +
> > +	dw->max_rd_len = pcie_get_readrq(pdev);
> > +	dw->max_rd_len >>= 2;
> > +
> > +	dw->pdev = pdev;
> > +
> > +	writel(0x0, &(__dw_regs(dw)->RAM_addr));
> > +	writel(0x0, &(__dw_regs(dw)->RAM_port));
> > +
> > +	addr = dw->rg_region.paddr + DW_XDATA_EP_MEM_OFFSET;
> > +	writel(lower_32_bits(addr), &(__dw_regs(dw)->addr_lsb));
> > +	writel(upper_32_bits(addr), &(__dw_regs(dw)->addr_msb));
> > +	pci_dbg(pdev, "xData: target address = 0x%.16llx\n", addr);
> > +
> > +	pci_dbg(pdev, "xData: wr_len=%zu, rd_len=%zu\n",
> > +		dw->max_wr_len * 4, dw->max_rd_len * 4);
> > +
> > +	/* Saving data structure reference */
> > +	pci_set_drvdata(pdev, dw);
> > +
> > +	/* Sysfs */
> > +	err = sysfs_create_group(&pdev->dev.kobj, &xdata_attr_group);
> 
> You just raced with userspace and lost :(
> 
> Have the driver core properly create/remove your sysfs files, set the
> default groups pointer in your driver and all will be fine.

I've gone around and around, searched in other drivers, but I'm not 
understanding your PoV or what I should do. Can you throw me a bone here?
I'm starting to pull my hair off, lol

I would like to ask you about something, it's you the maintainer of misc 
drivers right?
After fixing this issue, does this driver have a chance to be pulled on 
5.13?

-Gustavo

> 
> thanks,
> 
> greg k-h