Re: [PATCH v4 2/4] dt-bindings: power: rockchip: Convert to json-schema

From: elaine.zhang
Date: Wed Mar 24 2021 - 06:19:09 EST

Hi,  Enric

在 2021/3/24 下午5:56, Enric Balletbo i Serra 写道:
Hi Elaine,

This is not the exact version I sent, and you reintroduced a "problem" that were
already solved/discussed on previous versions. See below:

On 24/3/21 8:16, Elaine Zhang wrote:
Convert the soc/rockchip/power_domain.txt binding document to
json-schema and move to the power bindings directory.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
If you do significant is a good practice shortly describe them within [] here.

Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
Note that my last version already had the

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Which should be fine for merging (with probably only minor changes) and you
could maintain if you don't do significant changes, but that's not the case, as
I said, you are reintroducing one problem. Please review the comments already
received on this patchset or similar patchsets to avoid this.

---
.../power/rockchip,power-controller.yaml | 284 ++++++++++++++++++
.../bindings/soc/rockchip/power_domain.txt | 136 ---------
2 files changed, 284 insertions(+), 136 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt

diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 000000000000..a220322c5139
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+ - Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
+ - Rob Herring <robh+dt@xxxxxxxxxx>
Up to Rob, but I don't think Rob would like to be the maintainer. I think you
can only include yourself and Heiko.


+ - Heiko Stuebner <heiko@xxxxxxxxx>
+
+description: |
+ Rockchip processors include support for multiple power domains which can be
+ powered up/down by software based on different application scenarios to save power.
+
+ Power domains contained within power-controller node are generic power domain
+ providers documented in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ IP cores belonging to a power domain should contain a "power-domains"
+ property that is a phandle for the power domain node representing the domain.
+
+properties:
+ $nodename:
+ const: power-controller
+
+ compatible:
+ enum:
+ - rockchip,px30-power-controller
+ - rockchip,rk3036-power-controller
+ - rockchip,rk3066-power-controller
+ - rockchip,rk3128-power-controller
+ - rockchip,rk3188-power-controller
+ - rockchip,rk3228-power-controller
+ - rockchip,rk3288-power-controller
+ - rockchip,rk3328-power-controller
+ - rockchip,rk3366-power-controller
+ - rockchip,rk3368-power-controller
+ - rockchip,rk3399-power-controller
+
+ "#power-domain-cells":
+ const: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
+ type: object
+ description: |
+ Represents the power domains within the power controller node as documented
+ in Documentation/devicetree/bindings/power/power-domain.yaml.
+
The node names must be generic, as this is power-domain must be in the form:

+patternProperties:
+ "^power-domain@[0-9a-f]+$":
In this way, dtbs_check cannot be passed, and all the usage methods in dts of Rockchip need to be corrected, which I think is a bigger change.


+ properties:
+
+ "#power-domain-cells":
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+ description: |
+ Power domain index. Valid values are defined in
+ "include/dt-bindings/power/px30-power.h"
+ "include/dt-bindings/power/rk3036-power.h"
+ "include/dt-bindings/power/rk3066-power.h"
+ "include/dt-bindings/power/rk3128-power.h"
+ "include/dt-bindings/power/rk3188-power.h"
+ "include/dt-bindings/power/rk3228-power.h"
+ "include/dt-bindings/power/rk3288-power.h"
+ "include/dt-bindings/power/rk3328-power.h"
+ "include/dt-bindings/power/rk3366-power.h"
+ "include/dt-bindings/power/rk3368-power.h"
+ "include/dt-bindings/power/rk3399-power.h"
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled while power domain
+ switches state.
+
+ pm_qos:
+ description: |
+ A number of phandles to qos blocks which need to be saved and restored
+ while power domain switches state.
+
+ patternProperties:
+ "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
The same here:

+patternProperties:
+ "^power-domain@[0-9a-f]+$":



+ type: object
+ description: |
+ Represents a power domain child within a power domain parent node.
+
+ properties:
+
+ "#power-domain-cells":
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled while power domain
+ switches state.
+
+ pm_qos:
+ description: |
+ A number of phandles to qos blocks which need to be saved and restored
+ while power domain switches state.
+
+ patternProperties:
+ "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
And here:

+ type: object
+ description: |
+ Represents a power domain child within a power domain parent node.
+
+ properties:
+
+ "#power-domain-cells":
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled while power domain
+ switches state.
+
+ pm_qos:
+ description: |
+ A number of phandles to qos blocks which need to be saved and restored
+ while power domain switches state.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/power/rk3399-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qos_hdcp: qos@ffa90000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa90000 0x0 0x20>;
+ };
+
+ qos_iep: qos@ffa98000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa98000 0x0 0x20>;
+ };
+
+ qos_rga_r: qos@ffab0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0000 0x0 0x20>;
+ };
+
+ qos_rga_w: qos@ffab0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0080 0x0 0x20>;
+ };
+
+ qos_video_m0: qos@ffab8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab8000 0x0 0x20>;
+ };
+
+ qos_video_m1_r: qos@ffac0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0000 0x0 0x20>;
+ };
+
+ qos_video_m1_w: qos@ffac0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0080 0x0 0x20>;
+ };
+
+ power-management@ff310000 {
+ compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff310000 0x0 0x1000>;
+
+ power-controller {
+ compatible = "rockchip,rk3399-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_CENTER */
+ pd_iep@RK3399_PD_IEP {
Here and below must be generic power-domain@RK3399_PD_IEP


+ reg = <RK3399_PD_IEP>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>;
+ pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
+ };
+ pd_rga@RK3399_PD_RGA {
+ reg = <RK3399_PD_RGA>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+ pd_vcodec@RK3399_PD_VCODEC {
+ reg = <RK3399_PD_VCODEC>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
+ };
+ pd_vdu@RK3399_PD_VDU {
+ reg = <RK3399_PD_VDU>;
+ clocks = <&cru ACLK_VDU>,
+ <&cru HCLK_VDU>;
+ pm_qos = <&qos_video_m1_r>,
+ <&qos_video_m1_w>;
+ #power-domain-cells = <0>;
+ };
+ pd_vio@RK3399_PD_VIO {
+ reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_hdcp@RK3399_PD_HDCP {
+ reg = <RK3399_PD_HDCP>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru HCLK_HDCP>,
+ <&cru PCLK_HDCP>;
+ pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
deleted file mode 100644
index 8304eceb62e4..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ /dev/null
@@ -1,136 +0,0 @@
-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
- "rockchip,px30-power-controller" - for PX30 SoCs.
- "rockchip,rk3036-power-controller" - for RK3036 SoCs.
- "rockchip,rk3066-power-controller" - for RK3066 SoCs.
- "rockchip,rk3128-power-controller" - for RK3128 SoCs.
- "rockchip,rk3188-power-controller" - for RK3188 SoCs.
- "rockchip,rk3228-power-controller" - for RK3228 SoCs.
- "rockchip,rk3288-power-controller" - for RK3288 SoCs.
- "rockchip,rk3328-power-controller" - for RK3328 SoCs.
- "rockchip,rk3366-power-controller" - for RK3366 SoCs.
- "rockchip,rk3368-power-controller" - for RK3368 SoCs.
- "rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
- Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
- "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
- "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
- "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
- "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
- "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
- "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
- "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
- "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
- "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
- "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
- switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
- while power domain switches state.
-
-Qos Example:
-
- qos_gpu: qos_gpu@ffaf0000 {
- compatible ="syscon";
- reg = <0x0 0xffaf0000 0x0 0x20>;
- };
-
-Example:
-
- power: power-controller {
- compatible = "rockchip,rk3288-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_gpu {
- reg = <RK3288_PD_GPU>;
- clocks = <&cru ACLK_GPU>;
- pm_qos = <&qos_gpu>;
- };
- };
-
- power: power-controller {
- compatible = "rockchip,rk3368-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_gpu_1 {
- reg = <RK3368_PD_GPU_1>;
- clocks = <&cru ACLK_GPU_CFG>;
- };
- };
-
-Example 2:
- power: power-controller {
- compatible = "rockchip,rk3399-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_vio {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <RK3399_PD_VIO>;
-
- pd_vo {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <RK3399_PD_VO>;
-
- pd_vopb {
- reg = <RK3399_PD_VOPB>;
- };
-
- pd_vopl {
- reg = <RK3399_PD_VOPL>;
- };
- };
- };
- };
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
- "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
- "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
- "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
- "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
- "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
- "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
- "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
- node {
- /* ... */
- power-domains = <&power RK3288_PD_GPU>;
- /* ... */
- };
-
- node {
- /* ... */
- power-domains = <&power RK3368_PD_GPU_1>;
- /* ... */
- };
-
- node {
- /* ... */
- power-domains = <&power RK3399_PD_VOPB>;
- /* ... */
- };