[PATCH v14 2/7] arm64: dts: mt8183: add svs device information

[Roger Lu]

add compitable/reg/irq/clock/efuse setting in svs node

Signed-off-by: Roger Lu <roger.lu@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..441d617ece43 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -657,6 +657,18 @@
 			status = "disabled";
 		};
 
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -941,9 +953,15 @@
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
 			mipi_tx_calibration: calib@190 {
 				reg = <0x190 0xc>;
 			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy: usb-phy@11f40000 {
-- 
2.18.0