[PATCH V2 0/5] Add driver support for Data Capture and Compare Engine(DCC) for SM8150
From: Souradeep Chowdhury
Date: Thu Mar 25 2021 - 04:04:25 EST
DCC(Data Capture and Compare) is a DMA engine designed for debugging purposes.In case of a system
crash or manual software triggers by the user the DCC hardware stores the value at the register
addresses which can be used for debugging purposes.The DCC driver provides the user with sysfs
interface to configure the register addresses.The options that the DCC hardware provides include
reading from registers,writing to registers,first reading and then writing to registers and looping
through the values of the same register.
In certain cases a register write needs to be executed for accessing the rest of the registers,
also the user might want to record the changing values of a register with time for which he has the
option to use the loop feature.
The options mentioned above are exposed to the user by sysfs files once the driver is probed.The
details and usage of this sysfs files are documented in Documentation/ABI/testing/sysfs-driver-dcc.
As an example let us consider a couple of debug scenarios where DCC has been proved to be effective
for debugging purposes:-
i)TimeStamp Related Issue
On SC7180, there was a coresight timestamp issue where it would occasionally be all 0 instead of proper
timestamp values.
Proper timestamp:
Idx:3373; ID:10; I_TIMESTAMP : Timestamp.; Updated val = 0x13004d8f5b7aa; CC=0x9e
Zero timestamp:
Idx:3387; ID:10; I_TIMESTAMP : Timestamp.; Updated val = 0x0; CC=0xa2
Now this is a non-fatal issue and doesn't need a system reset, but still needs
to be rootcaused and fixed for those who do care about coresight etm traces.
Since this is a timestamp issue, we would be looking for any timestamp related
clocks and such.
o we get all the clk register details from IP documentation and configure it
via DCC config syfs node. Before that we set the current linked list.
/* Set the current linked list */
echo 3 > /sys/bus/platform/devices/10a2000.dcc/curr_list
/* Program the linked list with the addresses */
echo 0x10c004 > /sys/bus/platform/devices/10a2000.dcc/config
echo 0x10c008 > /sys/bus/platform/devices/10a2000.dcc/config
echo 0x10c00c > /sys/bus/platform/devices/10a2000.dcc/config
echo 0x10c010 > /sys/bus/platform/devices/10a2000.dcc/config
..... and so on for other timestamp related clk registers
/* Other way of specifying is in "addr len" pair, in below case it
specifies to capture 4 words starting 0x10C004 */
echo 0x10C004 4 > /sys/bus/platform/devices/10a2000.dcc/config
/* Enable DCC */
echo 1 > /sys/bus/platform/devices/10a2000.dcc/enable
/* Run the timestamp test for working case */
/* Send SW trigger */
echo 1 > /sys/bus/platform/devices/10a2000.dcc/trigger
/* Read SRAM */
cat /dev/dcc_sram > dcc_sram1.bin
/* Run the timestamp test for non-working case */
/* Send SW trigger */
echo 1 > /sys/bus/platform/devices/10a2000.dcc/trigger
/* Read SRAM */
cat /dev/dcc_sram > dcc_sram2.bin
Get the parser from [1] and checkout the latest branch.
/* Parse the SRAM bin */
python dcc_parser.py -s dcc_sram1.bin --v2 -o output/
python dcc_parser.py -s dcc_sram2.bin --v2 -o output/
Sample parsed output of dcc_sram1.bin:
<hwioDump version="1">
<timestamp>03/14/21</timestamp>
<generator>Linux DCC Parser</generator>
<chip name="None" version="None">
<register address="0x0010c004" value="0x80000000" />
<register address="0x0010c008" value="0x00000008" />
<register address="0x0010c00c" value="0x80004220" />
<register address="0x0010c010" value="0x80000000" />
</chip>
<next_ll_offset>next_ll_offset : 0x1c </next_ll_offset>
</hwioDump>
ii)NOC register errors
A particular class of registers called NOC which are functional registers was reporting
errors while logging the values.To trace these errors the DCC has been used effectively.
The steps followed were similar to the ones mentioned above.
In addition to NOC registers a few other dependent registers were configured in DCC to
monitor it's values during a crash. A look at the dependent register values revealed that
the crash was happening due to a secured access to one of these dependent registers.
All these debugging activity and finding the root cause was achieved using DCC.
DCC parser is available at the following open source location
https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/tools/tree/dcc_parser
Souradeep Chowdhury (5):
dt-bindings: Added the yaml bindings for DCC
soc: qcom: dcc:Add driver support for Data Capture and Compare
unit(DCC)
DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver
MAINTAINERS:Add the entry for DCC(Data Capture and Compare) driver
support
arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support
node
Documentation/ABI/testing/sysfs-driver-dcc | 114 ++
.../devicetree/bindings/arm/msm/qcom,dcc.yaml | 49 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/qcom/sm8150.dtsi | 7 +
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/dcc.c | 1549 ++++++++++++++++++++
7 files changed, 1736 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-driver-dcc
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
create mode 100644 drivers/soc/qcom/dcc.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation