[PATCH AUTOSEL 4.19 17/20] ASoC: rt5659: Update MCLK rate in set_sysclk()

From: Sasha Levin
Date: Thu Mar 25 2021 - 07:38:41 EST


From: Sameer Pujar <spujar@xxxxxxxxxx>

[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]

Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.

Suggested-by: Mark Brown <broonie@xxxxxxxxxx>
Suggested-by: Michael Walle <michael@xxxxxxxx>
Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
sound/soc/codecs/rt5659.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 1c1a521c73cb..b331b3ba61a9 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3466,12 +3466,17 @@ static int rt5659_set_component_sysclk(struct snd_soc_component *component, int
{
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
unsigned int reg_val = 0;
+ int ret;

if (freq == rt5659->sysclk && clk_id == rt5659->sysclk_src)
return 0;

switch (clk_id) {
case RT5659_SCLK_S_MCLK:
+ ret = clk_set_rate(rt5659->mclk, freq);
+ if (ret)
+ return ret;
+
reg_val |= RT5659_SCLK_SRC_MCLK;
break;
case RT5659_SCLK_S_PLL1:
--
2.30.1