Re: [PATCH v3 10/10] pinctrl: Ingenic: Add pinctrl driver for X2000.
From: Paul Cercueil
Date: Sat Mar 27 2021 - 16:00:03 EST
Hi Zhou,
Le jeu. 25 mars 2021 à 17:03, Zhou Yanjie <zhouyanjie@xxxxxxxxxxxxxx>
a écrit :
Hi Paul,
On 2021/3/23 上午2:39, Paul Cercueil wrote:
Le mer. 17 mars 2021 à 17:58, 周琰杰 (Zhou Yanjie)
<zhouyanjie@xxxxxxxxxxxxxx> a écrit :
Add support for probing the pinctrl-ingenic driver on the
X2000 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---
Notes:
v3:
New patch.
drivers/pinctrl/pinctrl-ingenic.c | 502
+++++++++++++++++++++++++++++++++++++-
1 file changed, 493 insertions(+), 9 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c
b/drivers/pinctrl/pinctrl-ingenic.c
index eb4912d..538d1b5 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -57,6 +57,10 @@
#define X1830_GPIO_PEL 0x110
#define X1830_GPIO_PEH 0x120
+#define X2000_GPIO_EDG 0x70
+#define X2000_GPIO_PEPU 0x80
+#define X2000_GPIO_PEPD 0x90
+
#define REG_SET(x) ((x) + 0x4)
#define REG_CLEAR(x) ((x) + 0x8)
@@ -94,6 +98,7 @@ enum jz_version {
ID_X1000,
ID_X1500,
ID_X1830,
+ ID_X2000,
};
struct ingenic_chip_info {
@@ -2273,6 +2278,439 @@ static const struct ingenic_chip_info
x1830_chip_info = {
.pull_downs = x1830_pull_downs,
};
+static const u32 x2000_pull_ups[5] = {
+ 0x0003ffff, 0xffffffff, 0x1ff0ffff, 0xc7fe3f3f, 0x8fff003f,
+};
+
+static const u32 x2000_pull_downs[5] = {
+ 0x0003ffff, 0xffffffff, 0x1ff0ffff, 0x00000000, 0x8fff003f,
+};
+
+static int x2000_uart0_data_pins[] = { 0x77, 0x78, };
+static int x2000_uart0_hwflow_pins[] = { 0x79, 0x7a, };
+static int x2000_uart1_data_pins[] = { 0x57, 0x58, };
+static int x2000_uart1_hwflow_pins[] = { 0x55, 0x56, };
+static int x2000_uart2_data_pins[] = { 0x7e, 0x7f, };
+static int x2000_uart3_data_c_pins[] = { 0x59, 0x5a, };
+static int x2000_uart3_data_d_pins[] = { 0x62, 0x63, };
+static int x2000_uart3_hwflow_c_pins[] = { 0x5b, 0x5c, };
+static int x2000_uart3_hwflow_d_pins[] = { 0x60, 0x61, };
+static int x2000_uart4_data_a_pins[] = { 0x02, 0x03, };
+static int x2000_uart4_data_c_pins[] = { 0x4b, 0x4c, };
+static int x2000_uart4_hwflow_a_pins[] = { 0x00, 0x01, };
+static int x2000_uart4_hwflow_c_pins[] = { 0x49, 0x4a, };
+static int x2000_uart5_data_a_pins[] = { 0x04, 0x05, };
+static int x2000_uart5_data_c_pins[] = { 0x45, 0x46, };
+static int x2000_uart6_data_a_pins[] = { 0x06, 0x07, };
+static int x2000_uart6_data_c_pins[] = { 0x47, 0x48, };
+static int x2000_uart7_data_a_pins[] = { 0x08, 0x09, };
+static int x2000_uart7_data_c_pins[] = { 0x41, 0x42, };
+static int x2000_uart8_data_pins[] = { 0x3c, 0x3d, };
+static int x2000_uart9_data_pins[] = { 0x3e, 0x3f, };
+static int x2000_sfc0_d_pins[] = { 0x73, 0x74, 0x75, 0x76, 0x71,
0x72, };
+static int x2000_sfc0_e_pins[] = { 0x92, 0x93, 0x94, 0x95, 0x90,
0x91, };
+static int x2000_sfc1_pins[] = { 0x77, 0x78, 0x79, 0x7a, };
+static int x2000_ssi0_dt_b_pins[] = { 0x3e, };
+static int x2000_ssi0_dt_d_pins[] = { 0x69, };
+static int x2000_ssi0_dr_b_pins[] = { 0x3d, };
+static int x2000_ssi0_dr_d_pins[] = { 0x6a, };
+static int x2000_ssi0_clk_b_pins[] = { 0x3f, };
+static int x2000_ssi0_clk_d_pins[] = { 0x68, };
+static int x2000_ssi0_ce0_b_pins[] = { 0x3c, };
+static int x2000_ssi0_ce0_d_pins[] = { 0x6d, };
+static int x2000_ssi1_dt_c_pins[] = { 0x4b, };
+static int x2000_ssi1_dt_d_pins[] = { 0x72, };
+static int x2000_ssi1_dt_e_pins[] = { 0x91, };
+static int x2000_ssi1_dr_c_pins[] = { 0x4a, };
+static int x2000_ssi1_dr_d_pins[] = { 0x73, };
+static int x2000_ssi1_dr_e_pins[] = { 0x92, };
+static int x2000_ssi1_clk_c_pins[] = { 0x4c, };
+static int x2000_ssi1_clk_d_pins[] = { 0x71, };
+static int x2000_ssi1_clk_e_pins[] = { 0x90, };
+static int x2000_ssi1_ce0_c_pins[] = { 0x49, };
+static int x2000_ssi1_ce0_d_pins[] = { 0x76, };
+static int x2000_ssi1_ce0_e_pins[] = { 0x95, };
+static int x2000_mmc0_1bit_pins[] = { 0x71, 0x72, 0x73, };
+static int x2000_mmc0_4bit_pins[] = { 0x74, 0x75, 0x75, };
+static int x2000_mmc0_8bit_pins[] = { 0x77, 0x78, 0x79, 0x7a, };
+static int x2000_mmc1_1bit_pins[] = { 0x68, 0x69, 0x6a, };
+static int x2000_mmc1_4bit_pins[] = { 0x6b, 0x6c, 0x6d, };
+static int x2000_mmc2_1bit_pins[] = { 0x80, 0x81, 0x82, };
+static int x2000_mmc2_4bit_pins[] = { 0x83, 0x84, 0x85, };
+static int x2000_emc_8bit_data_pins[] = {
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+};
+static int x2000_emc_16bit_data_pins[] = {
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+};
+static int x2000_emc_addr_pins[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c,
+};
+static int x2000_emc_rd_we_pins[] = { 0x2d, 0x2e, };
+static int x2000_emc_wait_pins[] = { 0x2f, };
+static int x2000_emc_cs1_pins[] = { 0x57, };
+static int x2000_emc_cs2_pins[] = { 0x58, };
+static int x2000_i2c0_pins[] = { 0x4e, 0x4d, };
+static int x2000_i2c1_c_pins[] = { 0x58, 0x57, };
+static int x2000_i2c1_d_pins[] = { 0x6c, 0x6b, };
+static int x2000_i2c2_b_pins[] = { 0x37, 0x36, };
+static int x2000_i2c2_d_pins[] = { 0x75, 0x74, };
+static int x2000_i2c2_e_pins[] = { 0x94, 0x93, };
+static int x2000_i2c3_a_pins[] = { 0x11, 0x10, };
+static int x2000_i2c3_d_pins[] = { 0x7f, 0x7e, };
+static int x2000_i2c4_c_pins[] = { 0x5a, 0x59, };
+static int x2000_i2c4_d_pins[] = { 0x61, 0x60, };
+static int x2000_i2c5_c_pins[] = { 0x5c, 0x5b, };
+static int x2000_i2c5_d_pins[] = { 0x65, 0x64, };
+static int x2000_i2s1_data_tx_pins[] = { 0x47, };
+static int x2000_i2s1_data_rx_pins[] = { 0x44, };
+static int x2000_i2s1_clk_tx_pins[] = { 0x45, 0x46, };
+static int x2000_i2s1_clk_rx_pins[] = { 0x42, 0x43, };
+static int x2000_i2s1_sysclk_tx_pins[] = { 0x48, };
+static int x2000_i2s1_sysclk_rx_pins[] = { 0x41, };
+static int x2000_i2s2_data_rx0_pins[] = { 0x0a, };
+static int x2000_i2s2_data_rx1_pins[] = { 0x0b, };
+static int x2000_i2s2_data_rx2_pins[] = { 0x0c, };
+static int x2000_i2s2_data_rx3_pins[] = { 0x0d, };
+static int x2000_i2s2_clk_rx_pins[] = { 0x11, 0x09, };
+static int x2000_i2s2_sysclk_rx_pins[] = { 0x07, };
+static int x2000_i2s3_data_tx0_pins[] = { 0x03, };
+static int x2000_i2s3_data_tx1_pins[] = { 0x04, };
+static int x2000_i2s3_data_tx2_pins[] = { 0x05, };
+static int x2000_i2s3_data_tx3_pins[] = { 0x06, };
+static int x2000_i2s3_clk_tx_pins[] = { 0x10, 0x02, };
+static int x2000_i2s3_sysclk_tx_pins[] = { 0x00, };
+static int x2000_cim_8bit_pins[] = {
+ 0x0e, 0x0c, 0x0d, 0x4f,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+};
+static int x2000_cim_12bit_pins[] = { 0x08, 0x09, 0x0a, 0x0b, };
+static int x2000_lcd_rgb_24bit_pins[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x38, 0x3b, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+ 0x2e, 0x2f, 0x3a, 0x39, 0x30, 0x31, 0x32, 0x33,
+ 0x34, 0x35, 0x36, 0x37,
+};
+static int x2000_lcd_slcd_8bit_pins[] = {
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x3a, 0x38, 0x3b, 0x30, 0x39,
+};
+static int x2000_lcd_slcd_16bit_pins[] = {
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+};
Your LCD groups shouldn't overlap. See how it's done for the
JZ4725B.
The LCD controller of X2000 is similar to that of X1830, but is very
different from the previous JZ47 series SoCs. It essentially makes
two independent parts, which are used to control the LCD of the
universal RGB interface and the so-called smart LCD (LCD with
controller, compatible with the 8080 interface or 6800 interface).
The RGB part is more like the LCD controller in the jz47 series with
special pins and serial mode removed, the Smart LCD part is inherited
from X1000 (X1000's LCD controller does not support RGB interface,
and for the first time introduce this interface that compatible with
8080 or 6800 called as SLCD by Ingenic). So it may be more
appropriate to distinguish them. However, the RGB part can follow the
way of the jz47 series and split it into a combination of 16bit,
18bit, and 24bit.
What is your opinion?
In case of the X2000 (and maybe X1830 - didn't check), the RGB and SLCD
modules have pins in common, but with a different function number. As
such they don't actually share any group of pins, and should be
distinguised, yes.
You can split the RGB part the same way it's done for the JZ47xx SoCs.
For the SLCD, according to the PM it supports 1-bit, 8-bit, 9-bit,
16-bit, 18-bit and 24-bit, so you should have groups for these.
Thanks and best regards!
Cheers,
-Paul
+static int x2000_pwm_pwm0_c_pins[] = { 0x40, };
+static int x2000_pwm_pwm0_d_pins[] = { 0x7e, };
+static int x2000_pwm_pwm1_c_pins[] = { 0x41, };
+static int x2000_pwm_pwm1_d_pins[] = { 0x7f, };
+static int x2000_pwm_pwm2_c_pins[] = { 0x42, };
+static int x2000_pwm_pwm2_e_pins[] = { 0x80, };
+static int x2000_pwm_pwm3_c_pins[] = { 0x43, };
+static int x2000_pwm_pwm3_e_pins[] = { 0x81, };
+static int x2000_pwm_pwm4_c_pins[] = { 0x44, };
+static int x2000_pwm_pwm4_e_pins[] = { 0x82, };
+static int x2000_pwm_pwm5_c_pins[] = { 0x45, };
+static int x2000_pwm_pwm5_e_pins[] = { 0x83, };
+static int x2000_pwm_pwm6_c_pins[] = { 0x46, };
+static int x2000_pwm_pwm6_e_pins[] = { 0x84, };
+static int x2000_pwm_pwm7_c_pins[] = { 0x47, };
+static int x2000_pwm_pwm7_e_pins[] = { 0x85, };
+static int x2000_pwm_pwm8_pins[] = { 0x48, };
+static int x2000_pwm_pwm9_pins[] = { 0x49, };
+static int x2000_pwm_pwm10_pins[] = { 0x4a, };
+static int x2000_pwm_pwm11_pins[] = { 0x4b, };
+static int x2000_pwm_pwm12_pins[] = { 0x4c, };
+static int x2000_pwm_pwm13_pins[] = { 0x4d, };
+static int x2000_pwm_pwm14_pins[] = { 0x4e, };
+static int x2000_pwm_pwm15_pins[] = { 0x4f, };
+static int x2000_mac0_rmii_pins[] = {
+ 0x4b, 0x47, 0x46, 0x4a, 0x43, 0x42, 0x4c, 0x4d, 0x4e, 0x41,
+};
+static int x2000_mac0_rgmii_pins[] = {
+ 0x4b, 0x49, 0x48, 0x47, 0x46, 0x4a, 0x45, 0x44, 0x43, 0x42,
+ 0x4c, 0x4d, 0x4f, 0x4e, 0x41,
+};
+static int x2000_mac1_rmii_pins[] = {
+ 0x32, 0x2d, 0x2c, 0x31, 0x29, 0x28, 0x33, 0x34, 0x35, 0x37,
+};
+static int x2000_mac1_rgmii_pins[] = {
+ 0x32, 0x2f, 0x2e, 0x2d, 0x2c, 0x31, 0x2b, 0x2a, 0x29, 0x28,
+ 0x33, 0x34, 0x36, 0x35, 0x37,
+};
+static int x2000_otg_pins[] = { 0x96, };
+
+static u8 x2000_cim_8bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 2, };
+
+static const struct group_desc x2000_groups[] = {
+ INGENIC_PIN_GROUP("uart0-data", x2000_uart0_data, 2),
+ INGENIC_PIN_GROUP("uart0-hwflow", x2000_uart0_hwflow, 2),
+ INGENIC_PIN_GROUP("uart1-data", x2000_uart1_data, 1),
+ INGENIC_PIN_GROUP("uart1-hwflow", x2000_uart1_hwflow, 1),
+ INGENIC_PIN_GROUP("uart2-data", x2000_uart2_data, 0),
+ INGENIC_PIN_GROUP("uart3-data-c", x2000_uart3_data_c, 0),
+ INGENIC_PIN_GROUP("uart3-data-d", x2000_uart3_data_d, 1),
+ INGENIC_PIN_GROUP("uart3-hwflow-c", x2000_uart3_hwflow_c, 0),
+ INGENIC_PIN_GROUP("uart3-hwflow-d", x2000_uart3_hwflow_d, 1),
+ INGENIC_PIN_GROUP("uart4-data-a", x2000_uart4_data_a, 1),
+ INGENIC_PIN_GROUP("uart4-data-c", x2000_uart4_data_c, 3),
+ INGENIC_PIN_GROUP("uart4-hwflow-a", x2000_uart4_hwflow_a, 1),
+ INGENIC_PIN_GROUP("uart4-hwflow-c", x2000_uart4_hwflow_c, 3),
+ INGENIC_PIN_GROUP("uart5-data-a", x2000_uart5_data_a, 1),
+ INGENIC_PIN_GROUP("uart5-data-c", x2000_uart5_data_c, 3),
+ INGENIC_PIN_GROUP("uart6-data-a", x2000_uart6_data_a, 1),
+ INGENIC_PIN_GROUP("uart6-data-c", x2000_uart6_data_c, 3),
+ INGENIC_PIN_GROUP("uart7-data-a", x2000_uart7_data_a, 1),
+ INGENIC_PIN_GROUP("uart7-data-c", x2000_uart7_data_c, 3),
+ INGENIC_PIN_GROUP("uart8-data", x2000_uart8_data, 3),
+ INGENIC_PIN_GROUP("uart9-data", x2000_uart9_data, 3),
+ INGENIC_PIN_GROUP("sfc0-d", x2000_sfc0_d, 1),
+ INGENIC_PIN_GROUP("sfc0-e", x2000_sfc0_e, 0),
+ INGENIC_PIN_GROUP("sfc1", x2000_sfc1, 1),
+ INGENIC_PIN_GROUP("ssi0-dt-b", x2000_ssi0_dt_b, 1),
+ INGENIC_PIN_GROUP("ssi0-dt-d", x2000_ssi0_dt_d, 1),
+ INGENIC_PIN_GROUP("ssi0-dr-b", x2000_ssi0_dr_b, 1),
+ INGENIC_PIN_GROUP("ssi0-dr-d", x2000_ssi0_dr_d, 1),
+ INGENIC_PIN_GROUP("ssi0-clk-b", x2000_ssi0_clk_b, 1),
+ INGENIC_PIN_GROUP("ssi0-clk-d", x2000_ssi0_clk_d, 1),
+ INGENIC_PIN_GROUP("ssi0-ce0-b", x2000_ssi0_ce0_b, 1),
+ INGENIC_PIN_GROUP("ssi0-ce0-d", x2000_ssi0_ce0_d, 1),
+ INGENIC_PIN_GROUP("ssi1-dt-c", x2000_ssi1_dt_c, 2),
+ INGENIC_PIN_GROUP("ssi1-dt-d", x2000_ssi1_dt_d, 2),
+ INGENIC_PIN_GROUP("ssi1-dt-e", x2000_ssi1_dt_e, 1),
+ INGENIC_PIN_GROUP("ssi1-dr-c", x2000_ssi1_dr_c, 2),
+ INGENIC_PIN_GROUP("ssi1-dr-d", x2000_ssi1_dr_d, 2),
+ INGENIC_PIN_GROUP("ssi1-dr-e", x2000_ssi1_dr_e, 1),
+ INGENIC_PIN_GROUP("ssi1-clk-c", x2000_ssi1_clk_c, 2),
+ INGENIC_PIN_GROUP("ssi1-clk-d", x2000_ssi1_clk_d, 2),
+ INGENIC_PIN_GROUP("ssi1-clk-e", x2000_ssi1_clk_e, 1),
+ INGENIC_PIN_GROUP("ssi1-ce0-c", x2000_ssi1_ce0_c, 2),
+ INGENIC_PIN_GROUP("ssi1-ce0-d", x2000_ssi1_ce0_d, 2),
+ INGENIC_PIN_GROUP("ssi1-ce0-e", x2000_ssi1_ce0_e, 1),
+ INGENIC_PIN_GROUP("mmc0-1bit", x2000_mmc0_1bit, 0),
+ INGENIC_PIN_GROUP("mmc0-4bit", x2000_mmc0_4bit, 0),
+ INGENIC_PIN_GROUP("mmc0-8bit", x2000_mmc0_8bit, 0),
+ INGENIC_PIN_GROUP("mmc1-1bit", x2000_mmc1_1bit, 0),
+ INGENIC_PIN_GROUP("mmc1-4bit", x2000_mmc1_4bit, 0),
+ INGENIC_PIN_GROUP("mmc2-1bit", x2000_mmc2_1bit, 0),
+ INGENIC_PIN_GROUP("mmc2-4bit", x2000_mmc2_4bit, 0),
+ INGENIC_PIN_GROUP("emc-8bit-data", x2000_emc_8bit_data, 0),
+ INGENIC_PIN_GROUP("emc-16bit-data", x2000_emc_16bit_data, 0),
+ INGENIC_PIN_GROUP("emc-addr", x2000_emc_addr, 0),
+ INGENIC_PIN_GROUP("emc-rd-we", x2000_emc_rd_we, 0),
+ INGENIC_PIN_GROUP("emc-wait", x2000_emc_wait, 0),
+ INGENIC_PIN_GROUP("emc-cs1", x2000_emc_cs1, 3),
+ INGENIC_PIN_GROUP("emc-cs2", x2000_emc_cs2, 3),
+ INGENIC_PIN_GROUP("i2c0-data", x2000_i2c0, 3),
+ INGENIC_PIN_GROUP("i2c1-data-c", x2000_i2c1_c, 2),
+ INGENIC_PIN_GROUP("i2c1-data-d", x2000_i2c1_d, 1),
+ INGENIC_PIN_GROUP("i2c2-data-b", x2000_i2c2_b, 2),
+ INGENIC_PIN_GROUP("i2c2-data-d", x2000_i2c2_d, 2),
+ INGENIC_PIN_GROUP("i2c2-data-e", x2000_i2c2_e, 1),
+ INGENIC_PIN_GROUP("i2c3-data-a", x2000_i2c3_a, 0),
+ INGENIC_PIN_GROUP("i2c3-data-d", x2000_i2c3_d, 1),
+ INGENIC_PIN_GROUP("i2c4-data-c", x2000_i2c4_c, 1),
+ INGENIC_PIN_GROUP("i2c4-data-d", x2000_i2c4_d, 2),
+ INGENIC_PIN_GROUP("i2c5-data-c", x2000_i2c5_c, 1),
+ INGENIC_PIN_GROUP("i2c5-data-d", x2000_i2c5_d, 1),
+ INGENIC_PIN_GROUP("i2s1-data-tx", x2000_i2s1_data_tx, 2),
+ INGENIC_PIN_GROUP("i2s1-data-rx", x2000_i2s1_data_rx, 2),
+ INGENIC_PIN_GROUP("i2s1-clk-tx", x2000_i2s1_clk_tx, 2),
+ INGENIC_PIN_GROUP("i2s1-clk-rx", x2000_i2s1_clk_rx, 2),
+ INGENIC_PIN_GROUP("i2s1-sysclk-tx", x2000_i2s1_sysclk_tx, 2),
+ INGENIC_PIN_GROUP("i2s1-sysclk-rx", x2000_i2s1_sysclk_rx, 2),
+ INGENIC_PIN_GROUP("i2s2-data-rx0", x2000_i2s2_data_rx0, 2),
+ INGENIC_PIN_GROUP("i2s2-data-rx1", x2000_i2s2_data_rx1, 2),
+ INGENIC_PIN_GROUP("i2s2-data-rx2", x2000_i2s2_data_rx2, 2),
+ INGENIC_PIN_GROUP("i2s2-data-rx3", x2000_i2s2_data_rx3, 2),
+ INGENIC_PIN_GROUP("i2s2-clk-rx", x2000_i2s2_clk_rx, 2),
+ INGENIC_PIN_GROUP("i2s2-sysclk-rx", x2000_i2s2_sysclk_rx, 2),
+ INGENIC_PIN_GROUP("i2s3-data-tx0", x2000_i2s3_data_tx0, 2),
+ INGENIC_PIN_GROUP("i2s3-data-tx1", x2000_i2s3_data_tx1, 2),
+ INGENIC_PIN_GROUP("i2s3-data-tx2", x2000_i2s3_data_tx2, 2),
+ INGENIC_PIN_GROUP("i2s3-data-tx3", x2000_i2s3_data_tx3, 2),
+ INGENIC_PIN_GROUP("i2s3-clk-tx", x2000_i2s3_clk_tx, 2),
+ INGENIC_PIN_GROUP("i2s3-sysclk-tx", x2000_i2s3_sysclk_tx, 2),
+ INGENIC_PIN_GROUP_FUNCS("cim-data-8bit", x2000_cim_8bit,
+ x2000_cim_8bit_funcs),
+ INGENIC_PIN_GROUP("cim-data-12bit", x2000_cim_12bit, 0),
+ INGENIC_PIN_GROUP("lcd-rgb-24bit", x2000_lcd_rgb_24bit, 1),
+ INGENIC_PIN_GROUP("lcd-slcd-8bit", x2000_lcd_slcd_8bit, 2),
+ INGENIC_PIN_GROUP("lcd-slcd-16bit", x2000_lcd_slcd_16bit, 2),
You should have these groups: lcd-8bit, lcd-16bit, lcd-18bit,
lcd-24bit, lcd-generic, lcd-special.
Your lcd-slcd-16bit would then be lcd-8bit + lcd-16bit. (non-SLCD
panels would need lcd-generic as well).
+ { "lcd-no-pins", },
Like on the other patches, please drop this.
Cheers,
-Paul
+ INGENIC_PIN_GROUP("pwm0-c", x2000_pwm_pwm0_c, 0),
+ INGENIC_PIN_GROUP("pwm0-d", x2000_pwm_pwm0_d, 2),
+ INGENIC_PIN_GROUP("pwm1-c", x2000_pwm_pwm1_c, 0),
+ INGENIC_PIN_GROUP("pwm1-d", x2000_pwm_pwm1_d, 2),
+ INGENIC_PIN_GROUP("pwm2-c", x2000_pwm_pwm2_c, 0),
+ INGENIC_PIN_GROUP("pwm2-e", x2000_pwm_pwm2_e, 1),
+ INGENIC_PIN_GROUP("pwm3-c", x2000_pwm_pwm3_c, 0),
+ INGENIC_PIN_GROUP("pwm3-e", x2000_pwm_pwm3_e, 1),
+ INGENIC_PIN_GROUP("pwm4-c", x2000_pwm_pwm4_c, 0),
+ INGENIC_PIN_GROUP("pwm4-e", x2000_pwm_pwm4_e, 1),
+ INGENIC_PIN_GROUP("pwm5-c", x2000_pwm_pwm5_c, 0),
+ INGENIC_PIN_GROUP("pwm5-e", x2000_pwm_pwm5_e, 1),
+ INGENIC_PIN_GROUP("pwm6-c", x2000_pwm_pwm6_c, 0),
+ INGENIC_PIN_GROUP("pwm6-e", x2000_pwm_pwm6_e, 1),
+ INGENIC_PIN_GROUP("pwm7-c", x2000_pwm_pwm7_c, 0),
+ INGENIC_PIN_GROUP("pwm7-e", x2000_pwm_pwm7_e, 1),
+ INGENIC_PIN_GROUP("pwm8", x2000_pwm_pwm8, 0),
+ INGENIC_PIN_GROUP("pwm9", x2000_pwm_pwm9, 0),
+ INGENIC_PIN_GROUP("pwm10", x2000_pwm_pwm10, 0),
+ INGENIC_PIN_GROUP("pwm11", x2000_pwm_pwm11, 0),
+ INGENIC_PIN_GROUP("pwm12", x2000_pwm_pwm12, 0),
+ INGENIC_PIN_GROUP("pwm13", x2000_pwm_pwm13, 0),
+ INGENIC_PIN_GROUP("pwm14", x2000_pwm_pwm14, 0),
+ INGENIC_PIN_GROUP("pwm15", x2000_pwm_pwm15, 0),
+ INGENIC_PIN_GROUP("mac0-rmii", x2000_mac0_rmii, 1),
+ INGENIC_PIN_GROUP("mac0-rgmii", x2000_mac0_rgmii, 1),
+ INGENIC_PIN_GROUP("mac1-rmii", x2000_mac1_rmii, 3),
+ INGENIC_PIN_GROUP("mac1-rgmii", x2000_mac1_rgmii, 3),
+ INGENIC_PIN_GROUP("otg-vbus", x2000_otg, 0),
+};
+
+static const char *x2000_uart0_groups[] = { "uart0-data",
"uart0-hwflow", };
+static const char *x2000_uart1_groups[] = { "uart1-data",
"uart1-hwflow", };
+static const char *x2000_uart2_groups[] = { "uart2-data", };
+static const char *x2000_uart3_groups[] = {
+ "uart3-data-c", "uart3-data-d", "uart3-hwflow-c",
"uart3-hwflow-d",
+};
+static const char *x2000_uart4_groups[] = {
+ "uart4-data-a", "uart4-data-c", "uart4-hwflow-a",
"uart4-hwflow-c",
+};
+static const char *x2000_uart5_groups[] = { "uart5-data-a",
"uart5-data-c", };
+static const char *x2000_uart6_groups[] = { "uart6-data-a",
"uart6-data-c", };
+static const char *x2000_uart7_groups[] = { "uart7-data-a",
"uart7-data-c", };
+static const char *x2000_uart8_groups[] = { "uart8-data", };
+static const char *x2000_uart9_groups[] = { "uart9-data", };
+static const char *x2000_sfc_groups[] = { "sfc0-d", "sfc0-e",
"sfc1", };
+static const char *x2000_ssi0_groups[] = {
+ "ssi0-dt-b", "ssi0-dt-d",
+ "ssi0-dr-b", "ssi0-dr-d",
+ "ssi0-clk-b", "ssi0-clk-d",
+ "ssi0-ce0-b", "ssi0-ce0-d",
+};
+static const char *x2000_ssi1_groups[] = {
+ "ssi1-dt-c", "ssi1-dt-d", "ssi1-dt-e",
+ "ssi1-dr-c", "ssi1-dr-d", "ssi1-dr-e",
+ "ssi1-clk-c", "ssi1-clk-d", "ssi1-clk-e",
+ "ssi1-ce0-c", "ssi1-ce0-d", "ssi1-ce0-e",
+};
+static const char *x2000_mmc0_groups[] = { "mmc0-1bit",
"mmc0-4bit", "mmc0-8bit", };
+static const char *x2000_mmc1_groups[] = { "mmc1-1bit",
"mmc1-4bit", };
+static const char *x2000_mmc2_groups[] = { "mmc2-1bit",
"mmc2-4bit", };
+static const char *x2000_emc_groups[] = {
+ "emc-8bit-data", "emc-16bit-data",
+ "emc-addr", "emc-rd-we", "emc-wait",
+};
+static const char *x2000_cs1_groups[] = { "emc-cs1", };
+static const char *x2000_cs2_groups[] = { "emc-cs2", };
+static const char *x2000_i2c0_groups[] = { "i2c0-data", };
+static const char *x2000_i2c1_groups[] = { "i2c1-data-c",
"i2c1-data-d", };
+static const char *x2000_i2c2_groups[] = { "i2c2-data-b",
"i2c2-data-d", };
+static const char *x2000_i2c3_groups[] = { "i2c3-data-a",
"i2c3-data-d", };
+static const char *x2000_i2c4_groups[] = { "i2c4-data-c",
"i2c4-data-d", };
+static const char *x2000_i2c5_groups[] = { "i2c5-data-c",
"i2c5-data-d", };
+static const char *x2000_i2s1_groups[] = {
+ "i2s1-data-tx", "i2s1-data-rx",
+ "i2s1-clk-tx", "i2s1-clk-rx",
+ "i2s1-sysclk-tx", "i2s1-sysclk-rx",
+};
+static const char *x2000_i2s2_groups[] = {
+ "i2s2-data-rx0", "i2s2-data-rx1", "i2s2-data-rx2",
"i2s2-data-rx3",
+ "i2s2-clk-rx", "i2s2-sysclk-rx",
+};
+static const char *x2000_i2s3_groups[] = {
+ "i2s3-data-tx0", "i2s3-data-tx1", "i2s3-data-tx2",
"i2s3-data-tx3",
+ "i2s3-clk-tx", "i2s3-sysclk-tx",
+};
+static const char *x2000_cim_groups[] = { "cim-data-8bit",
"cim-data-12bit", };
+static const char *x2000_lcd_groups[] = {
+ "lcd-rgb-24bit", "lcd-slcd-8bit", "lcd-slcd-16bit",
"lcd-no-pins",
+};
+static const char *x2000_pwm0_groups[] = { "pwm0-c", "pwm0-d", };
+static const char *x2000_pwm1_groups[] = { "pwm1-c", "pwm1-d", };
+static const char *x2000_pwm2_groups[] = { "pwm2-c", "pwm2-e", };
+static const char *x2000_pwm3_groups[] = { "pwm3-c", "pwm3-r", };
+static const char *x2000_pwm4_groups[] = { "pwm4-c", "pwm4-e", };
+static const char *x2000_pwm5_groups[] = { "pwm5-c", "pwm5-e", };
+static const char *x2000_pwm6_groups[] = { "pwm6-c", "pwm6-e", };
+static const char *x2000_pwm7_groups[] = { "pwm7-c", "pwm7-e", };
+static const char *x2000_pwm8_groups[] = { "pwm8", };
+static const char *x2000_pwm9_groups[] = { "pwm9", };
+static const char *x2000_pwm10_groups[] = { "pwm10", };
+static const char *x2000_pwm11_groups[] = { "pwm11", };
+static const char *x2000_pwm12_groups[] = { "pwm12", };
+static const char *x2000_pwm13_groups[] = { "pwm13", };
+static const char *x2000_pwm14_groups[] = { "pwm14", };
+static const char *x2000_pwm15_groups[] = { "pwm15", };
+static const char *x2000_mac0_groups[] = { "mac0-rmii",
"mac0-rgmii", };
+static const char *x2000_mac1_groups[] = { "mac1-rmii",
"mac1-rgmii", };
+static const char *x2000_otg_groups[] = { "otg-vbus", };
+
+static const struct function_desc x2000_functions[] = {
+ { "uart0", x2000_uart0_groups,
ARRAY_SIZE(x2000_uart0_groups), },
+ { "uart1", x2000_uart1_groups,
ARRAY_SIZE(x2000_uart1_groups), },
+ { "uart2", x2000_uart2_groups,
ARRAY_SIZE(x2000_uart2_groups), },
+ { "uart3", x2000_uart3_groups,
ARRAY_SIZE(x2000_uart3_groups), },
+ { "uart4", x2000_uart4_groups,
ARRAY_SIZE(x2000_uart4_groups), },
+ { "uart5", x2000_uart5_groups,
ARRAY_SIZE(x2000_uart5_groups), },
+ { "uart6", x2000_uart6_groups,
ARRAY_SIZE(x2000_uart6_groups), },
+ { "uart7", x2000_uart7_groups,
ARRAY_SIZE(x2000_uart7_groups), },
+ { "uart8", x2000_uart8_groups,
ARRAY_SIZE(x2000_uart8_groups), },
+ { "uart9", x2000_uart9_groups,
ARRAY_SIZE(x2000_uart9_groups), },
+ { "sfc", x2000_sfc_groups, ARRAY_SIZE(x2000_sfc_groups), },
+ { "ssi0", x2000_ssi0_groups, ARRAY_SIZE(x2000_ssi0_groups), },
+ { "ssi1", x2000_ssi1_groups, ARRAY_SIZE(x2000_ssi1_groups), },
+ { "mmc0", x2000_mmc0_groups, ARRAY_SIZE(x2000_mmc0_groups), },
+ { "mmc1", x2000_mmc1_groups, ARRAY_SIZE(x2000_mmc1_groups), },
+ { "mmc2", x2000_mmc2_groups, ARRAY_SIZE(x2000_mmc2_groups), },
+ { "emc", x2000_emc_groups, ARRAY_SIZE(x2000_emc_groups), },
+ { "emc-cs1", x2000_cs1_groups, ARRAY_SIZE(x2000_cs1_groups),
},
+ { "emc-cs2", x2000_cs2_groups, ARRAY_SIZE(x2000_cs2_groups),
},
+ { "i2c0", x2000_i2c0_groups, ARRAY_SIZE(x2000_i2c0_groups), },
+ { "i2c1", x2000_i2c1_groups, ARRAY_SIZE(x2000_i2c1_groups), },
+ { "i2c2", x2000_i2c2_groups, ARRAY_SIZE(x2000_i2c2_groups), },
+ { "i2c3", x2000_i2c3_groups, ARRAY_SIZE(x2000_i2c3_groups), },
+ { "i2c4", x2000_i2c4_groups, ARRAY_SIZE(x2000_i2c4_groups), },
+ { "i2c5", x2000_i2c5_groups, ARRAY_SIZE(x2000_i2c5_groups), },
+ { "i2s1", x2000_i2s1_groups, ARRAY_SIZE(x2000_i2s1_groups), },
+ { "i2s2", x2000_i2s2_groups, ARRAY_SIZE(x2000_i2s2_groups), },
+ { "i2s3", x2000_i2s3_groups, ARRAY_SIZE(x2000_i2s3_groups), },
+ { "cim", x2000_cim_groups, ARRAY_SIZE(x2000_cim_groups), },
+ { "lcd", x2000_lcd_groups, ARRAY_SIZE(x2000_lcd_groups), },
+ { "pwm0", x2000_pwm0_groups, ARRAY_SIZE(x2000_pwm0_groups), },
+ { "pwm1", x2000_pwm1_groups, ARRAY_SIZE(x2000_pwm1_groups), },
+ { "pwm2", x2000_pwm2_groups, ARRAY_SIZE(x2000_pwm2_groups), },
+ { "pwm3", x2000_pwm3_groups, ARRAY_SIZE(x2000_pwm3_groups), },
+ { "pwm4", x2000_pwm4_groups, ARRAY_SIZE(x2000_pwm4_groups), },
+ { "pwm5", x2000_pwm5_groups, ARRAY_SIZE(x2000_pwm5_groups), },
+ { "pwm6", x2000_pwm6_groups, ARRAY_SIZE(x2000_pwm6_groups), },
+ { "pwm7", x2000_pwm7_groups, ARRAY_SIZE(x2000_pwm7_groups), },
+ { "pwm8", x2000_pwm8_groups, ARRAY_SIZE(x2000_pwm8_groups), },
+ { "pwm9", x2000_pwm9_groups, ARRAY_SIZE(x2000_pwm9_groups), },
+ { "pwm10", x2000_pwm10_groups,
ARRAY_SIZE(x2000_pwm10_groups), },
+ { "pwm11", x2000_pwm11_groups,
ARRAY_SIZE(x2000_pwm11_groups), },
+ { "pwm12", x2000_pwm12_groups,
ARRAY_SIZE(x2000_pwm12_groups), },
+ { "pwm13", x2000_pwm13_groups,
ARRAY_SIZE(x2000_pwm13_groups), },
+ { "pwm14", x2000_pwm14_groups,
ARRAY_SIZE(x2000_pwm14_groups), },
+ { "pwm15", x2000_pwm15_groups,
ARRAY_SIZE(x2000_pwm15_groups), },
+ { "mac0", x2000_mac0_groups, ARRAY_SIZE(x2000_mac0_groups), },
+ { "mac1", x2000_mac1_groups, ARRAY_SIZE(x2000_mac1_groups), },
+ { "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
+};
+
+static const struct ingenic_chip_info x2000_chip_info = {
+ .num_chips = 5,
+ .reg_offset = 0x100,
+ .version = ID_X2000,
+ .groups = x2000_groups,
+ .num_groups = ARRAY_SIZE(x2000_groups),
+ .functions = x2000_functions,
+ .num_functions = ARRAY_SIZE(x2000_functions),
+ .pull_ups = x2000_pull_ups,
+ .pull_downs = x2000_pull_downs,
+};
+
static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc,
u8 reg)
{
unsigned int val;
@@ -2355,23 +2793,28 @@ static void irq_set_type(struct
ingenic_gpio_chip *jzgc,
u8 offset, unsigned int type)
{
u8 reg1, reg2;
- bool val1, val2;
+ bool val1, val2, val3;
val3 = type == IRQ_TYPE_EDGE_BOTH;
then you don't need to initialize val3 on each case of the switch.
switch (type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ val1 = val2 = false;
+ val3 = true;
+ break;
case IRQ_TYPE_EDGE_RISING:
val1 = val2 = true;
+ val3 = false;
break;
case IRQ_TYPE_EDGE_FALLING:
- val1 = false;
+ val1 = val3 = false;
val2 = true;
break;
case IRQ_TYPE_LEVEL_HIGH:
val1 = true;
- val2 = false;
+ val2 = val3 = false;
break;
case IRQ_TYPE_LEVEL_LOW:
default:
- val1 = val2 = false;
+ val1 = val2 = val3 = false;
break;
}
@@ -2389,7 +2832,12 @@ static void irq_set_type(struct
ingenic_gpio_chip *jzgc,
return;
}
- if (jzgc->jzpc->info->version >= ID_X1000) {
+ if (jzgc->jzpc->info->version >= ID_X2000) {
+ ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1);
+ ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2);
+ ingenic_gpio_shadow_set_bit_load(jzgc);
+ ingenic_gpio_set_bit(jzgc, X2000_GPIO_EDG, offset, val3);
+ } else if (jzgc->jzpc->info->version >= ID_X1000) {
ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1);
ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2);
ingenic_gpio_shadow_set_bit_load(jzgc);
@@ -2462,7 +2910,8 @@ static void ingenic_gpio_irq_ack(struct
irq_data *irqd)
int irq = irqd->hwirq;
bool high;
- if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
+ if ((irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) &&
+ (jzgc->jzpc->info->version < ID_X2000)) {
/*
* Switch to an interrupt for the opposite edge to the
one that
* triggered the interrupt being ACKed.
@@ -2501,7 +2950,7 @@ static int ingenic_gpio_irq_set_type(struct
irq_data *irqd, unsigned int type)
irq_set_handler_locked(irqd, handle_bad_irq);
}
- if (type == IRQ_TYPE_EDGE_BOTH) {
+ if ((type == IRQ_TYPE_EDGE_BOTH) &&
(jzgc->jzpc->info->version < ID_X2000)) {
/*
* The hardware does not support interrupts on both
edges. The
* best we can do is to set up a single-edge interrupt
and then
@@ -2803,7 +3252,15 @@ static int ingenic_pinconf_get(struct
pinctrl_dev *pctldev,
unsigned int bias;
bool pull, pullup, pulldown;
- if (jzpc->info->version >= ID_X1830) {
+ if (jzpc->info->version >= ID_X2000) {
+ pullup = ingenic_get_pin_config(jzpc, pin,
X2000_GPIO_PEPU) &&
+ !ingenic_get_pin_config(jzpc, pin,
X2000_GPIO_PEPD) &&
+ (jzpc->info->pull_ups[offt] & BIT(idx));
+ pulldown = ingenic_get_pin_config(jzpc, pin,
X2000_GPIO_PEPD) &&
+ !ingenic_get_pin_config(jzpc, pin,
X2000_GPIO_PEPU) &&
+ (jzpc->info->pull_downs[offt] & BIT(idx));
+
+ } else if (jzpc->info->version >= ID_X1830) {
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = pin % half * 2;
@@ -2858,7 +3315,25 @@ static int ingenic_pinconf_get(struct
pinctrl_dev *pctldev,
static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
unsigned int pin, unsigned int bias)
{
- if (jzpc->info->version >= ID_X1830) {
+ if (jzpc->info->version >= ID_X2000) {
+ switch (bias) {
+ case PIN_CONFIG_BIAS_PULL_UP:
Was that even tested? Your "bias" value is one of GPIO_PULL_DIS,
GPIO_PULL_UP or GPIO_PULL_DOWN, you can't match it against values of
the pin_config_param enum and expect it to work.
Cheers,
-Paul
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false);
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, true);
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, false);
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, true);
+ break;
+
+ case PIN_CONFIG_BIAS_DISABLE:
+ default:
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, false);
+ ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false);
+ }
+
+ } else if (jzpc->info->version >= ID_X1830) {
unsigned int idx = pin % PINS_PER_GPIO_CHIP;
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = pin % half * 2;
@@ -3033,6 +3508,7 @@ static const struct of_device_id
ingenic_gpio_of_match[] __initconst = {
{ .compatible = "ingenic,jz4780-gpio", },
{ .compatible = "ingenic,x1000-gpio", },
{ .compatible = "ingenic,x1830-gpio", },
+ { .compatible = "ingenic,x2000-gpio", },
{},
};
@@ -3275,6 +3751,14 @@ static const struct of_device_id
ingenic_pinctrl_of_match[] = {
.compatible = "ingenic,x1830-pinctrl",
.data = IF_ENABLED(CONFIG_MACH_X1830, &x1830_chip_info)
},
+ {
+ .compatible = "ingenic,x2000-pinctrl",
+ .data = IF_ENABLED(CONFIG_MACH_X2000, &x2000_chip_info)
+ },
+ {
+ .compatible = "ingenic,x2000e-pinctrl",
+ .data = IF_ENABLED(CONFIG_MACH_X2000, &x2000_chip_info)
+ },
{ /* sentinel */ },
};
--
2.7.4