Re: [PATCH v3 3/3] iio: adc: add ADC driver for the TI TSC2046 controller

[Oleksij Rempel]

On Mon, Mar 22, 2021 at 02:27:22PM +0000, Jonathan Cameron wrote:
> > > > +static DECLARE_TI_TSC2046_8_CHANNELS(tsc2046_adc, 12);
> > > > +
> > > > +static const struct tsc2046_adc_dcfg tsc2046_adc_dcfg_tsc2046e = {
> > > > +	.channels = tsc2046_adc_channels,
> > > > +	.num_channels = ARRAY_SIZE(tsc2046_adc_channels),
> > > > +};
> > > > +  
> > > 
> > > Hmm.  Flexibility that isn't yet used.  Normally I'm pretty resistant
> > > to this going in, unless I'm reassured that there is support for additional
> > > devices already in the pipeline.  Is that true here?  Otherwise
> > > this is basically unneeded complexity.  
> > 
> > In the long term this driver should replace
> > drivers/input/touchscreen/ads7846.c
> > 
> > This driver supports ti,ads7843, ti,ads7845, ti,ads7846.. at least with
> > following number of supported channels:
> > ti,ads7843 - 4 channels: x, y, aux0, aux1
> > ti,ads7845 - 3 channels: x, y, aux0
> > ti,ads7846 - 8 channels...
> > 
> > Currently I don't have this HW for testing and there a subtle
> > differences that have to be taken care of and tested.
> > 
> 
> Note that I'm only going to merge this driver with an explicit statement
> from Dmitry as input maintainer that he is fine with this approach.

Since there is still no Dmitry's feedback please take a look to the
ti,ads7843 datasheet:
https://www.ti.com/lit/ds/symlink/ads7843.pdf

On the page 1 you can see, that this device has two general purpose ADC
inputs IN3, IN4. If some one will decide to mainline support for this
pins, will end with IIO ADC driver any way :)

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |