[PATCH 5.4 060/111] net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream commit 47142ed6c34d544ae9f0463e58d482289cbe0d46 ]

Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net:
bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to
qualify the phydev->dev_flags based on whether the port is connected to
an internal or external PHY otherwise we risk having a flags collision
with a completely different interpretation depending on the driver.

Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/dsa/bcm_sf2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index ca425c15953b..0ee1c0a7b165 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -479,8 +479,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
 	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
 	 * the REG_PHY_REVISION register layout is.
 	 */
-
-	return priv->hw_params.gphy_rev;
+	if (priv->int_phy_mask & BIT(port))
+		return priv->hw_params.gphy_rev;
+	else
+		return 0;
 }
 
 static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
-- 
2.30.1