Re: [PATCH V3 4/5] net: ethernet: ravb: Enable optional refclk
From: Adam Ford
Date: Mon Mar 29 2021 - 08:46:10 EST
On Thu, Mar 4, 2021 at 2:08 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Adam,
>
> On Wed, Feb 24, 2021 at 12:52 PM Adam Ford <aford173@xxxxxxxxx> wrote:
> > For devices that use a programmable clock for the AVB reference clock,
> > the driver may need to enable them. Add code to find the optional clock
> > and enable it when available.
> >
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/drivers/net/ethernet/renesas/ravb_main.c
> > +++ b/drivers/net/ethernet/renesas/ravb_main.c
> > @@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
> > goto out_release;
> > }
> >
> > + priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
> > + if (IS_ERR(priv->refclk)) {
> > + error = PTR_ERR(priv->refclk);
> > + goto out_release;
> > + }
> > + clk_prepare_enable(priv->refclk);
> > +
>
> Shouldn't the reference clock be disabled in case of any failure below?
>
I'll generate a V4.
Should I just regenerate this patch since it seems like the rest are
OK, or should I regenerate the whole series?
adam
> > ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
> > ndev->min_mtu = ETH_MIN_MTU;
> >
> > @@ -2260,6 +2267,9 @@ static int ravb_remove(struct platform_device *pdev)
> > if (priv->chip_id != RCAR_GEN2)
> > ravb_ptp_stop(ndev);
> >
> > + if (priv->refclk)
> > + clk_disable_unprepare(priv->refclk);
> > +
> > dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
> > priv->desc_bat_dma);
> > /* Set reset mode */
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds