[PATCH v1] i2c: tegra: Improve handling of i2c_recover_bus()

[Dmitry Osipenko]

The i2c_recover_bus() returns -EOPNOTSUPP if bus recovery isn't wired up,
which the case for older Tegra SoCs at the moment. This error code is then
propagated to I2C client and might be confusing, thus return -EIO instead.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c883044715f3..cb5e3cc96160 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1196,8 +1196,14 @@ static int tegra_i2c_error_recover(struct tegra_i2c_dev *i2c_dev,
 
 	/* start recovery upon arbitration loss in single master mode */
 	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
-		if (!i2c_dev->multimaster_mode)
-			return i2c_recover_bus(&i2c_dev->adapter);
+		if (!i2c_dev->multimaster_mode) {
+			int err = i2c_recover_bus(&i2c_dev->adapter);
+
+			if (err == -EOPNOTSUPP)
+				return -EIO;
+
+			return err;
+		}
 
 		return -EAGAIN;
 	}
-- 
2.30.2