[PATCH v1 6/6] memory: tegra: Print out info-level once per driver probe

[Dmitry Osipenko]

Probing of EMC drivers may be deferred and in this case we get duplicated
info messages during kernel boot. Use dev_info_once() helper to silence
the duplicated messages.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/memory/tegra/tegra124-emc.c | 12 ++++++------
 drivers/memory/tegra/tegra20-emc.c  | 20 ++++++++++----------
 drivers/memory/tegra/tegra30-emc.c  | 18 +++++++++---------
 3 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 874e1a0f23cd..5699d909abc2 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -905,7 +905,7 @@ static int emc_init(struct tegra_emc *emc)
 	else
 		emc->dram_bus_width = 32;
 
-	dev_info(emc->dev, "%ubit DRAM bus\n", emc->dram_bus_width);
+	dev_info_once(emc->dev, "%ubit DRAM bus\n", emc->dram_bus_width);
 
 	emc->dram_type &= EMC_FBIO_CFG5_DRAM_TYPE_MASK;
 	emc->dram_type >>= EMC_FBIO_CFG5_DRAM_TYPE_SHIFT;
@@ -1419,8 +1419,8 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
 		goto put_hw_table;
 	}
 
-	dev_info(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
-		 hw_version, clk_get_rate(emc->clk) / 1000000);
+	dev_info_once(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
+		      hw_version, clk_get_rate(emc->clk) / 1000000);
 
 	/* first dummy rate-set initializes voltage state */
 	err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
@@ -1475,9 +1475,9 @@ static int tegra_emc_probe(struct platform_device *pdev)
 		if (err)
 			return err;
 	} else {
-		dev_info(&pdev->dev,
-			 "no memory timings for RAM code %u found in DT\n",
-			 ram_code);
+		dev_info_once(&pdev->dev,
+			      "no memory timings for RAM code %u found in DT\n",
+			      ram_code);
 	}
 
 	err = emc_init(emc);
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index d653a6be8d7f..da8a0da8da79 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -411,12 +411,12 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
 	sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings,
 	     NULL);
 
-	dev_info(emc->dev,
-		 "got %u timings for RAM code %u (min %luMHz max %luMHz)\n",
-		 emc->num_timings,
-		 tegra_read_ram_code(),
-		 emc->timings[0].rate / 1000000,
-		 emc->timings[emc->num_timings - 1].rate / 1000000);
+	dev_info_once(emc->dev,
+		      "got %u timings for RAM code %u (min %luMHz max %luMHz)\n",
+		      emc->num_timings,
+		      tegra_read_ram_code(),
+		      emc->timings[0].rate / 1000000,
+		      emc->timings[emc->num_timings - 1].rate / 1000000);
 
 	return 0;
 }
@@ -429,7 +429,7 @@ tegra_emc_find_node_by_ram_code(struct device *dev)
 	int err;
 
 	if (of_get_child_count(dev->of_node) == 0) {
-		dev_info(dev, "device-tree doesn't have memory timings\n");
+		dev_info_once(dev, "device-tree doesn't have memory timings\n");
 		return NULL;
 	}
 
@@ -496,7 +496,7 @@ static int emc_setup_hw(struct tegra_emc *emc)
 	else
 		emc->dram_bus_width = 32;
 
-	dev_info(emc->dev, "%ubit DRAM bus\n", emc->dram_bus_width);
+	dev_info_once(emc->dev, "%ubit DRAM bus\n", emc->dram_bus_width);
 
 	return 0;
 }
@@ -931,8 +931,8 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
 		goto put_hw_table;
 	}
 
-	dev_info(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
-		 hw_version, clk_get_rate(emc->clk) / 1000000);
+	dev_info_once(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
+		      hw_version, clk_get_rate(emc->clk) / 1000000);
 
 	/* first dummy rate-set initializes voltage state */
 	err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index 6985da0ffb35..829f6d673c96 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -998,12 +998,12 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc,
 	if (err)
 		return err;
 
-	dev_info(emc->dev,
-		 "got %u timings for RAM code %u (min %luMHz max %luMHz)\n",
-		 emc->num_timings,
-		 tegra_read_ram_code(),
-		 emc->timings[0].rate / 1000000,
-		 emc->timings[emc->num_timings - 1].rate / 1000000);
+	dev_info_once(emc->dev,
+		      "got %u timings for RAM code %u (min %luMHz max %luMHz)\n",
+		      emc->num_timings,
+		      tegra_read_ram_code(),
+		      emc->timings[0].rate / 1000000,
+		      emc->timings[emc->num_timings - 1].rate / 1000000);
 
 	return 0;
 }
@@ -1015,7 +1015,7 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev)
 	int err;
 
 	if (of_get_child_count(dev->of_node) == 0) {
-		dev_info(dev, "device-tree doesn't have memory timings\n");
+		dev_info_once(dev, "device-tree doesn't have memory timings\n");
 		return NULL;
 	}
 
@@ -1503,8 +1503,8 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
 		goto put_hw_table;
 	}
 
-	dev_info(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
-		 hw_version, clk_get_rate(emc->clk) / 1000000);
+	dev_info_once(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
+		      hw_version, clk_get_rate(emc->clk) / 1000000);
 
 	/* first dummy rate-set initializes voltage state */
 	err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
-- 
2.30.2