Re: [PATCH rfc 3/4] percpu: on demand chunk depopulation

From: Roman Gushchin
Date: Mon Mar 29 2021 - 21:05:52 EST


On Mon, Mar 29, 2021 at 11:12:34PM +0000, Dennis Zhou wrote:
> On Mon, Mar 29, 2021 at 01:10:10PM -0700, Roman Gushchin wrote:
> > On Mon, Mar 29, 2021 at 07:21:24PM +0000, Dennis Zhou wrote:
> > > On Wed, Mar 24, 2021 at 12:06:25PM -0700, Roman Gushchin wrote:
> > > > To return unused memory to the system schedule an async
> > > > depopulation of percpu chunks.
> > > >
> > > > To balance between scanning too much and creating an overhead because
> > > > of the pcpu_lock contention and scanning not enough, let's track an
> > > > amount of chunks to scan and mark chunks which are potentially a good
> > > > target for the depopulation with a new boolean flag. The async
> > > > depopulation work will clear the flag after trying to depopulate a
> > > > chunk (successfully or not).
> > > >
> > > > This commit suggest the following logic: if a chunk
> > > > 1) has more than 1/4 of total pages free and populated
> > > > 2) isn't a reserved chunk
> > > > 3) isn't entirely free
> > > > 4) isn't alone in the corresponding slot
> > >
> > > I'm not sure I like the check for alone that much. The reason being what
> > > about some odd case where each slot has a single chunk, but every slot
> > > is populated. It doesn't really make sense to keep them all around.
> >
> > Yeah, I agree, I'm not sure either. Maybe we can just look at the total
> > number of populated empty pages and make sure it's not too low and not
> > too high. Btw, we should probably double PCPU_EMPTY_POP_PAGES_LOW/HIGH
> > if memcg accounting is on.
> >
>
> Hmmm. pcpu_nr_populated and pcpu_nr_empty_pop_pages should probably be
> per chunk type now that you mention it.
>
> > >
> > > I think there is some decision making we can do here to handle packing
> > > post depopulation allocations into a handful of chunks. Depopulated
> > > chunks could be sidelined with say a flag ->depopulated to prevent the
> > > first attempt of allocations from using them. And then we could bring
> > > back a chunk 1 by 1 somehow to attempt to suffice the allocation.
> > > I'm not too sure if this is a good idea, just a thought.
> >
> > I thought about it in this way: depopulated chunks are not different to
> > new chunks, which are not yet fully populated. And they are naturally
> > de-prioritized by being located in higher slots (and at the tail of the list).
> > So I'm not sure we should handle them any special.
> >
>
> I'm thinking of the following. Imagine 3 chunks, A and B in slot X, and
> C in slot X+1. If B gets depopulated followed by A getting exhausted,
> which chunk B or C should be used? If C is fully populated, we might
> want to use that one.
>
> I see that the priority is chunks at the very end, but I don't want to
> take something that doesn't reasonable generalize to any slot PAGE_SIZE
> and up. Or it should explicitly try to tackle only say the last N slots
> (but preferably the former).
>
> > >
> > > > it's a good target for depopulation.
> > > >
> > > > If there are 2 or more of such chunks, an async depopulation
> > > > is scheduled.
> > > >
> > > > Because chunk population and depopulation are opposite processes
> > > > which make a little sense together, split out the shrinking part of
> > > > pcpu_balance_populated() into pcpu_grow_populated() and make
> > > > pcpu_balance_populated() calling into pcpu_grow_populated() or
> > > > pcpu_shrink_populated() conditionally.
> > > >
> > > > Signed-off-by: Roman Gushchin <guro@xxxxxx>
> > > > ---
> > > > mm/percpu-internal.h | 1 +
> > > > mm/percpu.c | 111 ++++++++++++++++++++++++++++++++-----------
> > > > 2 files changed, 85 insertions(+), 27 deletions(-)
> > > >
> > > > diff --git a/mm/percpu-internal.h b/mm/percpu-internal.h
> > > > index 18b768ac7dca..1c5b92af02eb 100644
> > > > --- a/mm/percpu-internal.h
> > > > +++ b/mm/percpu-internal.h
> > > > @@ -67,6 +67,7 @@ struct pcpu_chunk {
> > > >
> > > > void *data; /* chunk data */
> > > > bool immutable; /* no [de]population allowed */
> > > > + bool depopulate; /* depopulation hint */
> > > > int start_offset; /* the overlap with the previous
> > > > region to have a page aligned
> > > > base_addr */
> > > > diff --git a/mm/percpu.c b/mm/percpu.c
> > > > index 015d076893f5..148137f0fc0b 100644
> > > > --- a/mm/percpu.c
> > > > +++ b/mm/percpu.c
> > > > @@ -178,6 +178,12 @@ static LIST_HEAD(pcpu_map_extend_chunks);
> > > > */
> > > > int pcpu_nr_empty_pop_pages;
> > > >
> > > > +/*
> > > > + * Track the number of chunks with a lot of free memory.
> > > > + * It's used to release unused pages to the system.
> > > > + */
> > > > +static int pcpu_nr_chunks_to_depopulate;
> > > > +
> > > > /*
> > > > * The number of populated pages in use by the allocator, protected by
> > > > * pcpu_lock. This number is kept per a unit per chunk (i.e. when a page gets
> > > > @@ -1955,6 +1961,11 @@ static void pcpu_balance_free(enum pcpu_chunk_type type)
> > > > if (chunk == list_first_entry(free_head, struct pcpu_chunk, list))
> > > > continue;
> > > >
> > > > + if (chunk->depopulate) {
> > > > + chunk->depopulate = false;
> > > > + pcpu_nr_chunks_to_depopulate--;
> > > > + }
> > > > +
> > > > list_move(&chunk->list, &to_free);
> > > > }
> > > >
> > > > @@ -1976,7 +1987,7 @@ static void pcpu_balance_free(enum pcpu_chunk_type type)
> > > > }
> > > >
> > > > /**
> > > > - * pcpu_balance_populated - manage the amount of populated pages
> > > > + * pcpu_grow_populated - populate chunk(s) to satisfy atomic allocations
> > > > * @type: chunk type
> > > > *
> > > > * Maintain a certain amount of populated pages to satisfy atomic allocations.
> > > > @@ -1985,35 +1996,15 @@ static void pcpu_balance_free(enum pcpu_chunk_type type)
> > > > * allocation causes the failure as it is possible that requests can be
> > > > * serviced from already backed regions.
> > > > */
> > > > -static void pcpu_balance_populated(enum pcpu_chunk_type type)
> > > > +static void pcpu_grow_populated(enum pcpu_chunk_type type, int nr_to_pop)
> > > > {
> > > > /* gfp flags passed to underlying allocators */
> > > > const gfp_t gfp = GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN;
> > > > struct list_head *pcpu_slot = pcpu_chunk_list(type);
> > > > struct pcpu_chunk *chunk;
> > > > - int slot, nr_to_pop, ret;
> > > > + int slot, ret;
> > > >
> > > > - /*
> > > > - * Ensure there are certain number of free populated pages for
> > > > - * atomic allocs. Fill up from the most packed so that atomic
> > > > - * allocs don't increase fragmentation. If atomic allocation
> > > > - * failed previously, always populate the maximum amount. This
> > > > - * should prevent atomic allocs larger than PAGE_SIZE from keeping
> > > > - * failing indefinitely; however, large atomic allocs are not
> > > > - * something we support properly and can be highly unreliable and
> > > > - * inefficient.
> > > > - */
> > > > retry_pop:
> > > > - if (pcpu_atomic_alloc_failed) {
> > > > - nr_to_pop = PCPU_EMPTY_POP_PAGES_HIGH;
> > > > - /* best effort anyway, don't worry about synchronization */
> > > > - pcpu_atomic_alloc_failed = false;
> > > > - } else {
> > > > - nr_to_pop = clamp(PCPU_EMPTY_POP_PAGES_HIGH -
> > > > - pcpu_nr_empty_pop_pages,
> > > > - 0, PCPU_EMPTY_POP_PAGES_HIGH);
> > > > - }
> > > > -
> > > > for (slot = pcpu_size_to_slot(PAGE_SIZE); slot < pcpu_nr_slots; slot++) {
> > > > unsigned int nr_unpop = 0, rs, re;
> > > >
> > > > @@ -2084,9 +2075,18 @@ static void pcpu_shrink_populated(enum pcpu_chunk_type type)
> > >
> > > I missed this in the review of patch 1, but pcpu_shrink only needs to
> > > iterate over:
> > > for (slot = pcpu_size_to_slot(PAGE_SIZE); slot < pcpu_nr_slots; slot++) {
> >
> > You mean skip first few slots?
> > Yeah, it's probably safe. I was afraid that a marked chunk can be moved to
> > one of such slots, so we'll never find it and will repeat scanning, but it seems
> > like it's not a possible scenario. Will adjust, thanks.
> >
> > >
> > > > list_for_each_entry(chunk, &pcpu_slot[slot], list) {
> > > > bool isolated = false;
> > > >
> > > > - if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_HIGH)
> > > > + if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_HIGH ||
> > > > + pcpu_nr_chunks_to_depopulate < 1)
> > > > break;
> > > >
> > > > + /*
> > > > + * Don't try to depopulate a chunk again and again.
> > > > + */
> > > > + if (!chunk->depopulate)
> > > > + continue;
> > > > + chunk->depopulate = false;
> > > > + pcpu_nr_chunks_to_depopulate--;
> > > > +
> > > > for (i = 0, start = -1; i < chunk->nr_pages; i++) {
> > > > if (!chunk->nr_empty_pop_pages)
> > > > break;
> > > > @@ -2153,6 +2153,41 @@ static void pcpu_shrink_populated(enum pcpu_chunk_type type)
> > > > spin_unlock_irq(&pcpu_lock);
> > > > }
> > > >
> > > > +/**
> > > > + * pcpu_balance_populated - manage the amount of populated pages
> > > > + * @type: chunk type
> > > > + *
> > > > + * Populate or depopulate chunks to maintain a certain amount
> > > > + * of free pages to satisfy atomic allocations, but not waste
> > > > + * large amounts of memory.
> > > > + */
> > > > +static void pcpu_balance_populated(enum pcpu_chunk_type type)
> > > > +{
> > > > + int nr_to_pop;
> > > > +
> > > > + /*
> > > > + * Ensure there are certain number of free populated pages for
> > > > + * atomic allocs. Fill up from the most packed so that atomic
> > > > + * allocs don't increase fragmentation. If atomic allocation
> > > > + * failed previously, always populate the maximum amount. This
> > > > + * should prevent atomic allocs larger than PAGE_SIZE from keeping
> > > > + * failing indefinitely; however, large atomic allocs are not
> > > > + * something we support properly and can be highly unreliable and
> > > > + * inefficient.
> > > > + */
> > > > + if (pcpu_atomic_alloc_failed) {
> > > > + nr_to_pop = PCPU_EMPTY_POP_PAGES_HIGH;
> > > > + /* best effort anyway, don't worry about synchronization */
> > > > + pcpu_atomic_alloc_failed = false;
> > > > + pcpu_grow_populated(type, nr_to_pop);
> > > > + } else if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_HIGH) {
> > > > + nr_to_pop = PCPU_EMPTY_POP_PAGES_HIGH - pcpu_nr_empty_pop_pages;
> > > > + pcpu_grow_populated(type, nr_to_pop);
> > > > + } else if (pcpu_nr_chunks_to_depopulate > 0) {
> > > > + pcpu_shrink_populated(type);
> > > > + }
> > > > +}
> > > > +
> > > > /**
> > > > * pcpu_balance_workfn - manage the amount of free chunks and populated pages
> > > > * @work: unused
> > > > @@ -2188,6 +2223,7 @@ void free_percpu(void __percpu *ptr)
> > > > int size, off;
> > > > bool need_balance = false;
> > > > struct list_head *pcpu_slot;
> > > > + struct pcpu_chunk *pos;
> > > >
> > > > if (!ptr)
> > > > return;
> > > > @@ -2207,15 +2243,36 @@ void free_percpu(void __percpu *ptr)
> > > >
> > > > pcpu_memcg_free_hook(chunk, off, size);
> > > >
> > > > - /* if there are more than one fully free chunks, wake up grim reaper */
> > > > if (chunk->free_bytes == pcpu_unit_size) {
> > > > - struct pcpu_chunk *pos;
> > > > -
> > > > + /*
> > > > + * If there are more than one fully free chunks,
> > > > + * wake up grim reaper.
> > > > + */
> > > > list_for_each_entry(pos, &pcpu_slot[pcpu_nr_slots - 1], list)
> > > > if (pos != chunk) {
> > > > need_balance = true;
> > > > break;
> > > > }
> > > > +
> > > > + } else if (chunk->nr_empty_pop_pages > chunk->nr_pages / 4) {
> > >
> > > We should have this ignore the first and reserved chunks. While it
> > > shouldn't be possible in theory, it would be nice to just make it
> > > explicit here.
> >
> > Ok, will do, makes sense to me!
> >
> > >
> > > > + /*
> > > > + * If there is more than one chunk in the slot and
> > > > + * at least 1/4 of its pages are empty, mark the chunk
> > > > + * as a target for the depopulation. If there is more
> > > > + * than one chunk like this, schedule an async balancing.
> > > > + */
> > > > + int nslot = pcpu_chunk_slot(chunk);
> > > > +
> > > > + list_for_each_entry(pos, &pcpu_slot[nslot], list)
> > > > + if (pos != chunk && !chunk->depopulate &&
> > > > + !chunk->immutable) {
> > > > + chunk->depopulate = true;
> > > > + pcpu_nr_chunks_to_depopulate++;
> > > > + break;
> > > > + }
> > > > +
> > > > + if (pcpu_nr_chunks_to_depopulate > 1)
> > > > + need_balance = true;
> > > > }
> > > >
> > > > trace_percpu_free_percpu(chunk->base_addr, off, ptr);
> > > > --
> > > > 2.30.2
> > > >
> > >
> > > Some questions I have:
> > > 1. How do we prevent unnecessary scanning for atomic allocations?
> >
> > Depopulated chunks tend to be at tail of the chunks lists in high(er) slots,
> > so they seem to be the last target for an atomic allocation, if there is
> > enough space in other chunks.
> >
>
> I'm just not seeing a reason slot(PAGE_SIZE) can't have 2 chunks in it
> and get the second chunk gets depopulated.
>
> > > 2. Even in the normal case, should we try to pack future allocations
> > > into a smaller # of chunks in after depopulation?
> >
> > Well, there is one specific problem I'm trying to solve: if the percpu memory
> > is heavily inflated by something (e.g. by creating a ton of cgroups or bpf maps),
> > sometimes it's impossible to get the memory back at all, even if the absolute
> > majority of percpu objects was released. In this case there are many chunks
> > which are almost entirely empty, and the actual size of the needed percpu memory
> > is way less that the number of populated pages.
> >
> > We can look at the percpu memory fragmentation as a more fundamental problem,
> > and probably the right thing to do long-term is to introduce some sort of a
> > slab allocator. At least, we can put small allocations (aka percpu reference
> > counters) into separate chunks. But this is obviously a way bigger change,
> > which unlikely can do into any stable branches, so I'd treat it separately.
> > Also, I'm not convinced that we really need it so much at the moment.
> > If the percpu usage is more or less stable, I don't see any pathological
> > fragmentation problem.
> >
>
> That makes sense. If we narrow the scope to reclaiming inflated usage,
> we could get rid of the 2 chunk in slot heuristic and scan up from
> slot(PAGE_SIZE), leaving a reasonable # of free pages,
> PCPU_EMPTY_POP_PAGES_LOW/HIGH, possibly just leaving those chunks
> untouched and then free anything else before the final slot which will
> be freed by the freeing path.
>
> Thinking a little more about what you said earlier, they're basically
> new chunks, anything PAGE_SIZE and up shouldn't expect to find a home
> quickly.

Sounds good to me. I'll stick with this approach in v2.

Idk how much we wanna optimize the "normal" (non-inflated) scenario.
My brief look into the fb production data showed that on average the prize is
not that big, maybe around 10% of the percpu memory or a double-digit number
in MBs. However in some extreme cases there are tens of GBs of wasted memory.
I'd focus on this problem first. Ideally we need a fix, which will be easy
to backport to stable branches.

>
> > > 3. What is the right frequency to do depopulation scanning? I think of
> > > the pcpu work item as a way to defer the 2 the freeing of chunks and in
> > > a way more immediately replenish free pages. Depopulation isn't
> > > necessarily as high a priority.
> >
> > I think that the number of chunks which are potentially good for the
> > depopulation is a good metric. I've chosen 2 as a threshold, but I'm
> > fine with other ideas as well.
> >
>
> We might need to untangle a few stats from global to per chunk_type.
> Thoughts? Having 1 chunk in each type isn't necessarily a bad thing, but
> having several 2+ is the problem?

Long-term I'm not sure we need 2 chunk types. If a reasonable percentage
of percpu allocations is accountable, it would probably be cheaper to
declare all chunks memcg-aware. But as now dividing chunks into two types
is likely having a positive effect on the percpu fragmentation: likely
largest allocations (both bpf and memcg) are put into one chunk set while
all percpu refcounters into an other.

Thanks!