Re: [PATCH v5 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy

From: Bjorn Andersson
Date: Mon Mar 29 2021 - 23:31:42 EST

Next message: Václav Kubernát: "Re: [PATCH] hwmon: Add driver for fsp-3y PSUs and PDUs"
Previous message: Bjorn Andersson: "Re: [PATCH v5 3/7] phy: qcom-qmp: move DP functions to callbacks"
In reply to: Dmitry Baryshkov: "[PATCH v5 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy"
Next in thread: Dmitry Baryshkov: "[PATCH v5 6/7] arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun 28 Mar 15:52 CDT 2021, Dmitry Baryshkov wrote:

> Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 388 ++++++++++++++++++++++++++--
> drivers/phy/qualcomm/phy-qcom-qmp.h | 40 ++-
> 2 files changed, 406 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 097bc005ba43..a47da2fff7a1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -1840,6 +1840,86 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> };
>
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
> +};
> +
> +static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> +};
> +
> static const struct qmp_phy_init_tbl sm8250_qmp_pcie_serdes_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x08),
> QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x34),
> @@ -2488,11 +2568,10 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> { 0x1f, 0xff, 0xff, 0xff }
> };
>
> -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, unsigned int drv_lvl, unsigned int emp_post)
> {
> const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> unsigned int v_level = 0, p_level = 0;
> - u32 bias_en, drvr_en;
> u8 voltage_swing_cfg, pre_emphasis_cfg;
> int i;
>
> @@ -2501,29 +2580,42 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> p_level = max(p_level, dp_opts->pre[i]);
> }
>
> - if (dp_opts->lanes == 1) {
> - bias_en = 0x3e;
> - drvr_en = 0x13;
> - } else {
> - bias_en = 0x3f;
> - drvr_en = 0x10;
> - }
> -
> voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
>
> /* TODO: Move check to config check */
> if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> - return;
> + return -EINVAL;
>
> /* Enable MUX to use Cursor values from these registers */
> voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
>
> - writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
> - writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> - writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> - writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(voltage_swing_cfg, qphy->tx + drv_lvl);
> + writel(pre_emphasis_cfg, qphy->tx + emp_post);
> + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl);
> + writel(pre_emphasis_cfg, qphy->tx2 + emp_post);
> +
> + return 0;
> +}
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 bias_en, drvr_en;
> +
> + if (qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V3_TX_TX_DRV_LVL,
> + QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> + return;
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
>
> writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> @@ -2531,12 +2623,10 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> }
>
> -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
> {
> - const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> - u32 val, phy_vco_div, status;
> - unsigned long pixel_freq;
> + u32 val;
> + bool reverse = false;
>
> val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> @@ -2559,6 +2649,19 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
>
> writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
> +
> + return reverse;
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + qcom_qmp_phy_configure_dp_mode(qphy);
> +
> writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
>
> @@ -2641,6 +2744,204 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> return 0;
> }
>
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + /* Program default values before writing proper values */
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + qcom_qmp_phy_configure_dp_swing(qphy,
> + QSERDES_V4_TX_TX_DRV_LVL,
> + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +}
> +
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 phy_vco_div, status;
> + unsigned long pixel_freq;
> + u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
> + bool reverse;
> +
> + writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
> +
> + reverse = qcom_qmp_phy_configure_dp_mode(qphy);
> +
> + writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
> +
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + /*
> + * At least for 7nm DP PHY this has to be done after enabling link
> + * clock.
> + */
> +
> + if (dp_opts->lanes == 1) {
> + bias0_en = reverse ? 0x3e : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3e;
> + drvr0_en = reverse ? 0x13 : 0x10;
> + drvr1_en = reverse ? 0x10 : 0x13;
> + } else if (dp_opts->lanes == 2) {
> + bias0_en = reverse ? 0x3f : 0x15;
> + bias1_en = reverse ? 0x15 : 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + } else {
> + bias0_en = 0x3f;
> + bias1_en = 0x3f;
> + drvr0_en = 0x10;
> + drvr1_en = 0x10;
> + }
> +
> + writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
> + writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
> +
> + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
> +
> + writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> + writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +
> + writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> + writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> {
> u32 reg;
> @@ -3346,6 +3647,46 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> };
>
> +static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> + .type = PHY_TYPE_DP,
> + .nlanes = 1,
> +
> + .serdes_tbl = qmp_v4_dp_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> + .tx_tbl = qmp_v4_dp_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
> +
> + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
> + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
> + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr,
> + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
> + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2,
> + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
> + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3,
> + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
> +
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> +
> + .has_phy_dp_com_ctrl = true,
> + .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> +};
> +
> +static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> + .usb_cfg = &sm8250_usb3phy_cfg,
> + .dp_cfg = &sm8250_dpphy_cfg,
> +};
> +
> static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -4601,6 +4942,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
> }, {
> .compatible = "qcom,sm8250-qmp-usb3-phy",
> .data = &sm8250_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + /* It's a combo phy */
> }, {
> .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
> .data = &sm8250_usb3_uniphy_cfg,
> @@ -4635,6 +4979,10 @@ static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
> .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
> .data = &sc7180_usb3dpphy_cfg,
> },
> + {
> + .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> + .data = &sm8250_usb3dpphy_cfg,
> + },
> { }
> };
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 981d8ee891c0..67bd2dd0d8c5 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -397,6 +397,7 @@
> #define QSERDES_V3_DP_PHY_STATUS 0x0c0
>
> /* Only for QMP V4 PHY - QSERDES COM registers */
> +#define QSERDES_V4_COM_BG_TIMER 0x00c
> #define QSERDES_V4_COM_SSC_EN_CENTER 0x010
> #define QSERDES_V4_COM_SSC_PER1 0x01c
> #define QSERDES_V4_COM_SSC_PER2 0x020
> @@ -404,7 +405,9 @@
> #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0 0x028
> #define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1 0x030
> #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1 0x034
> +#define QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN 0x044
> #define QSERDES_V4_COM_CLK_ENABLE1 0x048
> +#define QSERDES_V4_COM_SYS_CLK_CTRL 0x04c
> #define QSERDES_V4_COM_SYSCLK_BUF_ENABLE 0x050
> #define QSERDES_V4_COM_PLL_IVCO 0x058
> #define QSERDES_V4_COM_CMN_IPTRIM 0x060
> @@ -415,6 +418,7 @@
> #define QSERDES_V4_COM_PLL_CCTRL_MODE0 0x084
> #define QSERDES_V4_COM_PLL_CCTRL_MODE1 0x088
> #define QSERDES_V4_COM_SYSCLK_EN_SEL 0x094
> +#define QSERDES_V4_COM_RESETSM_CNTRL 0x09c
> #define QSERDES_V4_COM_LOCK_CMP_EN 0x0a4
> #define QSERDES_V4_COM_LOCK_CMP1_MODE0 0x0ac
> #define QSERDES_V4_COM_LOCK_CMP2_MODE0 0x0b0
> @@ -428,16 +432,24 @@
> #define QSERDES_V4_COM_DIV_FRAC_START1_MODE1 0x0d8
> #define QSERDES_V4_COM_DIV_FRAC_START2_MODE1 0x0dc
> #define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0
> +#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0 0x0ec
> +#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0 0x0f0
> +#define QSERDES_V4_COM_VCO_TUNE_CTRL 0x108
> #define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c
> #define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110
> #define QSERDES_V4_COM_VCO_TUNE2_MODE0 0x114
> #define QSERDES_V4_COM_VCO_TUNE1_MODE1 0x118
> #define QSERDES_V4_COM_VCO_TUNE2_MODE1 0x11c
> #define QSERDES_V4_COM_VCO_TUNE_INITVAL2 0x124
> +#define QSERDES_V4_COM_CMN_STATUS 0x140
> #define QSERDES_V4_COM_CLK_SELECT 0x154
> #define QSERDES_V4_COM_HSCLK_SEL 0x158
> #define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL 0x15c
> +#define QSERDES_V4_COM_CORECLK_DIV_MODE0 0x168
> #define QSERDES_V4_COM_CORECLK_DIV_MODE1 0x16c
> +#define QSERDES_V4_COM_CORE_CLK_EN 0x174
> +#define QSERDES_V4_COM_C_READY_STATUS 0x178
> +#define QSERDES_V4_COM_CMN_CONFIG 0x17c
> #define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184
> #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
> #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
> @@ -446,19 +458,32 @@
> #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8
>
> /* Only for QMP V4 PHY - TX registers */
> +#define QSERDES_V4_TX_CLKBUF_ENABLE 0x08
> +#define QSERDES_V4_TX_TX_EMP_POST1_LVL 0x0c
> +#define QSERDES_V4_TX_TX_DRV_LVL 0x14
> +#define QSERDES_V4_TX_RESET_TSYNC_EN 0x1c
> +#define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN 0x20
> +#define QSERDES_V4_TX_TX_BAND 0x24
> +#define QSERDES_V4_TX_INTERFACE_SELECT 0x2c
> #define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34
> #define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38
> #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c
> #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40
> +#define QSERDES_V4_TX_TRANSCEIVER_BIAS_EN 0x54
> +#define QSERDES_V4_TX_HIGHZ_DRVR_EN 0x58
> +#define QSERDES_V4_TX_TX_POL_INV 0x5c
> +#define QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN 0x60
> #define QSERDES_V4_TX_LANE_MODE_1 0x84
> #define QSERDES_V4_TX_LANE_MODE_2 0x88
> #define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c
> +#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
> +#define QSERDES_V4_TX_TX_INTERFACE_MODE 0xbc
> #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
> #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
> #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0
> #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4
> -#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
> -#define QSERDES_V4_TX_PI_QEC_CTRL 0x104
> +#define QSERDES_V4_TX_VMODE_CTRL1 0xe8
> +#define QSERDES_V4_TX_PI_QEC_CTRL 0x104
>
> /* Only for QMP V4 PHY - RX registers */
> #define QSERDES_V4_RX_UCDR_FO_GAIN 0x008
> @@ -515,6 +540,17 @@
> #define QSERDES_V4_RX_DCC_CTRL1 0x1bc
> #define QSERDES_V4_RX_VTH_CODE 0x1c4
>
> +/* Only for QMP V4 PHY - DP PHY registers */
> +#define QSERDES_V4_DP_PHY_CFG_1 0x014
> +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK 0x054
> +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_CLEAR 0x058
> +#define QSERDES_V4_DP_PHY_VCO_DIV 0x070
> +#define QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL 0x078
> +#define QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL 0x09c
> +#define QSERDES_V4_DP_PHY_SPARE0 0x0c8
> +#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8
> +#define QSERDES_V4_DP_PHY_STATUS 0x0dc
> +
> /* Only for QMP V4 PHY - UFS PCS registers */
> #define QPHY_V4_PCS_UFS_PHY_START 0x000
> #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004
> --
> 2.30.2
>

Next message: Václav Kubernát: "Re: [PATCH] hwmon: Add driver for fsp-3y PSUs and PDUs"
Previous message: Bjorn Andersson: "Re: [PATCH v5 3/7] phy: qcom-qmp: move DP functions to callbacks"
In reply to: Dmitry Baryshkov: "[PATCH v5 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy"
Next in thread: Dmitry Baryshkov: "[PATCH v5 6/7] arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]