Re: Compiling kernel-3.4.xxx with gcc-9.x. Need some help.

[Arnd Bergmann]

On Tue, Mar 30, 2021 at 3:23 PM Fawad Lateef <fawadlateef@xxxxxxxxx> wrote:
> On Mon, 29 Mar 2021 at 22:06, Arnd Bergmann <arnd@xxxxxxxxxx> wrote:
> >
> > On Mon, Mar 29, 2021 at 9:23 PM Fawad Lateef <fawadlateef@xxxxxxxxx> wrote:
> > >
> > > On Mon, 29 Mar 2021 at 06:57, Greg KH <greg@xxxxxxxxx> wrote:
> > > >
> > > > On Sun, Mar 28, 2021 at 10:20:50PM +0200, Fawad Lateef wrote:
> > > > > Hi
> > > > >
> > > > > I am using an Olimex A20 SOM with NAND and due to some binary blob for
> > > > > NAND driver, I am stuck with the sunxi kernel 3.4.xxx version. (Repo
> > > > > here: https://github.com/linux-sunxi/linux-sunxi)
> > > >
> > > > Please work with the vendor that is forcing you to use this obsolete and
> > > > insecure kernel version.  You are paying for that support, and they are
> > > > the only ones that can support you.
> > > >
> > >
> > > The problem is vendor Olimex now have eMMC based SOM which is
> > > supported by mainline kernel _but_ they still selling NAND SOM and
> > > only supporting 3.4 kernel (as this is the only latest version from
> > > sunxi with NAND support, after that sunxi is now moved away from NAND
> > > too).
> >
> > From a very quick look at the git history, I can tell that A20 NAND driver
> > support was added in linux-4.8. Have you actually tried a modern kernel?
> >
>
> I tried compiling and booting kernel v4.4 (from sunxi repo on github)
> but unable to make it boot. Stuck at "Starting kernel". By the way I
> am booting from RAM (using the sunxi usbboot/usb-otg option).
>
> You mentioned that it's supported from linux-4.8 (from your quick look
> at git history); can you tell me which driver/files? As I was able to
> see some sort of sunxi NAND driver even in v4.4 kernel
> (https://lxr.missinglinkelectronics.com/linux+v4.4/drivers/mtd/nand/sunxi_nand.c).

The nand flash controller node for a20 was added in commit
b2a83ad217b8 ("ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC")
The driver was merged first but not hooked up in the dt.
For the specific board file, you need to still need to either enable the
device and add a partition map in the dts (as described in the howto),
or have a boot loader that fills out that information.

> When I tried to compare with the sunxi-3.4 kernel code, I found that
> the kernel has code for "nfc" but no reference to "nfd" (I don't know
> what they are referring to).
> The sunxi 3.4 kernel NAND driver at quick look seems quite different.
> (https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.4/drivers/block/sunxi_nand)
>
> I will try the v4.8 or above kernel.

I think the custom nand driver in that tree was trying to avoid the
patents for nand flash by using an independently developed implementation,
but that of course leads to copyright issues with incompatible licenses.

The new driver is a regular mtd driver. I don't know whether the layout
of the data is compatible at all, so it's possible that you have to backup
all the data using the old kernel and write back the file system using a
new kernel.

       Arnd