[PATCH 01/12] USB: serial: xr: add support for XR21V1412 and XR21V1414

From: Johan Hovold
Date: Tue Mar 30 2021 - 10:40:26 EST


Add support for the two- and four-port variants of XR21V1410.

Use the interface number of each control interface (e.g. 0, 2, 4, 6) to
derive the zero-based channel index:

XR21V1410 0
XR21V1412 0, 1
XR21V1414 0, 1, 2, 3

Note that the UART registers reside in separate blocks per channel,
while the UART Manager functionality is implemented using per-channel
registers.

Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/xr_serial.c | 55 +++++++++++++++++++++++++++++++---
1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
index 88c73f88cb26..64bc9d7b948b 100644
--- a/drivers/usb/serial/xr_serial.c
+++ b/drivers/usb/serial/xr_serial.c
@@ -109,6 +109,10 @@ struct xr_txrx_clk_mask {
#define XR21V141X_REG_GPIO_CLR 0x1e
#define XR21V141X_REG_GPIO_STATUS 0x1f

+struct xr_data {
+ u8 channel; /* zero-based index */
+};
+
static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
{
struct usb_serial *serial = port->serial;
@@ -160,16 +164,31 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val)

static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val)
{
- return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 block;
+
+ block = XR21V141X_UART_REG_BLOCK + data->channel;
+
+ return xr_set_reg(port, block, reg, val);
}

static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val)
{
- return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 block;
+
+ block = XR21V141X_UART_REG_BLOCK + data->channel;
+
+ return xr_get_reg(port, block, reg, val);
}

-static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val)
+static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val)
{
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 reg;
+
+ reg = reg_base + data->channel;
+
return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
}

@@ -577,8 +596,34 @@ static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
return 0;
}

+static int xr_port_probe(struct usb_serial_port *port)
+{
+ struct usb_interface_descriptor *desc;
+ struct xr_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ desc = &port->serial->interface->cur_altsetting->desc;
+ data->channel = desc->bInterfaceNumber / 2;
+
+ usb_set_serial_port_data(port, data);
+
+ return 0;
+}
+
+static void xr_port_remove(struct usb_serial_port *port)
+{
+ struct xr_data *data = usb_get_serial_port_data(port);
+
+ kfree(data);
+}
+
static const struct usb_device_id id_table[] = {
- { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1410, USB_CLASS_COMM) }, /* XR21V141X */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1410, USB_CLASS_COMM) }, /* XR21V1410 */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1412, USB_CLASS_COMM) }, /* XR21V1412 */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1414, USB_CLASS_COMM) }, /* XR21V1414 */
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -591,6 +636,8 @@ static struct usb_serial_driver xr_device = {
.id_table = id_table,
.num_ports = 1,
.probe = xr_probe,
+ .port_probe = xr_port_probe,
+ .port_remove = xr_port_remove,
.open = xr_open,
.close = xr_close,
.break_ctl = xr_break_ctl,
--
2.26.3