[PATCH 01/16] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

[Pratyush Yadav]

From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>

As some D-PHY controllers support both Rx and Tx mode, we need a way for
users to explicitly request one or the other. For instance, Rx mode can
be used along with MIPI CSI-2 while Tx mode can be used with MIPI DSI.

Introduce new MIPI D-PHY PHY submodes to use with PHY_MODE_MIPI_DPHY.
The default (zero value) is kept to Tx so only the rkisp1 driver, which
uses D-PHY in Rx mode, needs to be adapted.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
---
 include/linux/phy/phy-mipi-dphy.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index a877ffee845d..0f57ef46a8b5 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -6,6 +6,19 @@
 #ifndef __PHY_MIPI_DPHY_H_
 #define __PHY_MIPI_DPHY_H_
 
+/**
+ * enum phy_mipi_dphy_submode - MIPI D-PHY sub-mode
+ *
+ * A MIPI D-PHY can be used to transmit or receive data.
+ * Since some controllers can support both, the direction to enable is specified
+ * with the PHY sub-mode. Transmit is assumed by default with phy_set_mode.
+ */
+
+enum phy_mipi_dphy_submode {
+	PHY_MIPI_DPHY_SUBMODE_TX = 0,
+	PHY_MIPI_DPHY_SUBMODE_RX,
+};
+
 /**
  * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
  *
-- 
2.30.0