[PATCH v3 2/6] clk: sifive: Use reset-simple in prci driver for PCIe driver

From: Greentime Hu
Date: Wed Mar 31 2021 - 05:27:26 EST


We use reset-simple in this patch so that pcie driver can use
devm_reset_control_get() to get this reset data structure and use
reset_control_deassert() to deassert pcie_power_up_rst_n.

Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Greentime Hu <greentime.hu@xxxxxxxxxx>
---
drivers/clk/sifive/Kconfig | 2 ++
drivers/clk/sifive/sifive-prci.c | 13 +++++++++++++
drivers/clk/sifive/sifive-prci.h | 4 ++++
drivers/reset/Kconfig | 1 +
4 files changed, 20 insertions(+)

diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index 1c14eb20c066..9132c3c4aa86 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -10,6 +10,8 @@ if CLK_SIFIVE

config CLK_SIFIVE_PRCI
bool "PRCI driver for SiFive SoCs"
+ select RESET_CONTROLLER
+ select RESET_SIMPLE
select CLK_ANALOGBITS_WRPLL_CLN28HPC
help
Supports the Power Reset Clock interface (PRCI) IP block found in
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
index baf7313dac92..871ccb287993 100644
--- a/drivers/clk/sifive/sifive-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -583,6 +583,19 @@ static int sifive_prci_probe(struct platform_device *pdev)
if (IS_ERR(pd->va))
return PTR_ERR(pd->va);

+ pd->reset.rcdev.owner = THIS_MODULE;
+ pd->reset.rcdev.nr_resets = PRCI_RST_NR;
+ pd->reset.rcdev.ops = &reset_simple_ops;
+ pd->reset.rcdev.of_node = pdev->dev.of_node;
+ pd->reset.active_low = true;
+ pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET;
+ spin_lock_init(&pd->reset.lock);
+
+ r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev);
+ if (r) {
+ dev_err(dev, "could not register reset controller: %d\n", r);
+ return r;
+ }
r = __prci_register_clocks(dev, pd, desc);
if (r) {
dev_err(dev, "could not register clocks: %d\n", r);
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
index 022c67cf053c..91658a88af4e 100644
--- a/drivers/clk/sifive/sifive-prci.h
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -11,6 +11,7 @@

#include <linux/clk/analogbits-wrpll-cln28hpc.h>
#include <linux/clk-provider.h>
+#include <linux/reset/reset-simple.h>
#include <linux/platform_device.h>

/*
@@ -121,6 +122,8 @@
#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_MASK \
(0x1 << PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT)

+#define PRCI_RST_NR 7
+
/* CLKMUXSTATUSREG */
#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
@@ -221,6 +224,7 @@
*/
struct __prci_data {
void __iomem *va;
+ struct reset_simple_data reset;
struct clk_hw_onecell_data hw_clks;
};

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 71ab75a46491..d0f5d0afc240 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -187,6 +187,7 @@ config RESET_SIMPLE
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- ZTE's zx2967 family
+ - SiFive FU740 SoCs

config RESET_STM32MP157
bool "STM32MP157 Reset Driver" if COMPILE_TEST
--
2.30.2