Re: [PATCH 00/16] CSI2RX support on J721E

[Pratyush Yadav]

On 31/03/21 03:03PM, Vinod Koul wrote:
> On 30-03-21, 23:03, Pratyush Yadav wrote:
> > Hi,
> > 
> > This series adds support for CSI2 capture on J721E. It includes some
> > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY
> > driver, and finally adds the TI CSI2RX wrapper driver.
> > 
> > Tested on TI's J721E with OV5640 sensor.
> > 
> > Paul Kocialkowski (1):
> >   phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
> > 
> > Pratyush Yadav (15):
> >   phy: cdns-dphy: Prepare for Rx support
> >   phy: cdns-dphy: Allow setting mode
> >   phy: cdns-dphy: Add Rx support
> >   media: cadence: csi2rx: Add external DPHY support
> >   media: cadence: csi2rx: Soft reset the streams before starting capture
> >   media: cadence: csi2rx: Set the STOP bit when stopping a stream
> >   media: cadence: csi2rx: Fix stream data configuration
> >   media: cadence: csi2rx: Turn subdev power on before starting stream
> >   media: cadence: csi2rx: Add wrappers for subdev calls
> >   dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
> >   dt-bindings: media: Add DT bindings for TI CSI2RX driver
> >   media: ti-vpe: csi2rx: Add CSI2RX support
> >   dt-bindings: phy: Convert Cadence DPHY binding to YAML
> >   dt-bindings: phy: cdns,dphy: make clocks optional
> >   dt-bindings: phy: cdns,dphy: add power-domains property
> 
> Is there any dependency between patches to various subsystems, if not
> please do consider sending a series per subsystem...

Without patch 1, patch 5 and later won't build. Without patch 11, patch 
13 will not work.

> 
> Thanks
> 
> 
> > 
> >  .../devicetree/bindings/media/ti,csi2rx.yaml  |  70 ++
> >  .../devicetree/bindings/phy/cdns,dphy.txt     |  20 -
> >  .../devicetree/bindings/phy/cdns,dphy.yaml    |  52 +
> >  MAINTAINERS                                   |   7 +
> >  drivers/dma/ti/k3-psil-j721e.c                |  10 +
> >  drivers/media/platform/Kconfig                |  11 +
> >  drivers/media/platform/cadence/cdns-csi2rx.c  | 269 ++++-
> >  drivers/media/platform/ti-vpe/Makefile        |   1 +
> >  drivers/media/platform/ti-vpe/ti-csi2rx.c     | 964 ++++++++++++++++++
> >  drivers/phy/cadence/cdns-dphy.c               | 407 +++++++-
> >  include/linux/phy/phy-mipi-dphy.h             |  13 +
> >  11 files changed, 1754 insertions(+), 70 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
> >  create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> >  create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c
> > 
> > --
> > 2.30.0
> 
> -- 
> ~Vinod

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.