[PATCH V3 4/5] dt-bindings: regulator: Convert RPMh regulator bindings to YAML
From: satya priya
Date: Wed Mar 31 2021 - 08:07:37 EST
Convert RPMh regulator bindings from .txt to .yaml format.
Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx>
---
Changes in V2:
- As per Mark's comment moved this patch to the end of series.
- As per Rob's comments, added flash and rgb bindings, dropped allOf and
unused labels and fixed few other things.
Changes in V3:
- Fixed bot errors and also changed commit text to specify RPMh regulator
bindings.
.../bindings/regulator/qcom,rpmh-regulator.txt | 180 ---------------------
.../bindings/regulator/qcom,rpmh-regulator.yaml | 158 ++++++++++++++++++
2 files changed, 158 insertions(+), 180 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
deleted file mode 100644
index ce1e043..0000000
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ /dev/null
@@ -1,180 +0,0 @@
-Qualcomm Technologies, Inc. RPMh Regulators
-
-rpmh-regulator devices support PMIC regulator management via the Voltage
-Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS
-processor communicates with these hardware blocks via a Resource State
-Coordinator (RSC) using command packets. The VRM allows changing three
-parameters for a given regulator: enable state, output voltage, and operating
-mode. The XOB allows changing only a single parameter for a given regulator:
-its enable state. Despite its name, the XOB is capable of controlling the
-enable state of any PMIC peripheral. It is used for clock buffers, low-voltage
-switches, and LDO/SMPS regulators which have a fixed voltage and mode.
-
-=======================
-Required Node Structure
-=======================
-
-RPMh regulators must be described in two levels of device nodes. The first
-level describes the PMIC containing the regulators and must reside within an
-RPMh device node. The second level describes each regulator within the PMIC
-which is to be used on the board. Each of these regulators maps to a single
-RPMh resource.
-
-The names used for regulator nodes must match those supported by a given PMIC.
-Supported regulator node names:
- PM8005: smps1 - smps4
- PM8009: smps1 - smps2, ldo1 - ldo7
- PM8150: smps1 - smps10, ldo1 - ldo18
- PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
- PM8350: smps1 - smps12, ldo1 - ldo10,
- PM8350C: smps1 - smps10, ldo1 - ldo13, bob
- PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
- PMI8998: bob
- PM6150: smps1 - smps5, ldo1 - ldo19
- PM6150L: smps1 - smps8, ldo1 - ldo11, bob
- PMX55: smps1 - smps7, ldo1 - ldo16
-
-========================
-First Level Nodes - PMIC
-========================
-
-- compatible
- Usage: required
- Value type: <string>
- Definition: Must be one of below:
- "qcom,pm8005-rpmh-regulators"
- "qcom,pm8009-rpmh-regulators"
- "qcom,pm8009-1-rpmh-regulators"
- "qcom,pm8150-rpmh-regulators"
- "qcom,pm8150l-rpmh-regulators"
- "qcom,pm8350-rpmh-regulators"
- "qcom,pm8350c-rpmh-regulators"
- "qcom,pm8998-rpmh-regulators"
- "qcom,pmc8180-rpmh-regulators"
- "qcom,pmc8180c-rpmh-regulators"
- "qcom,pmi8998-rpmh-regulators"
- "qcom,pm6150-rpmh-regulators"
- "qcom,pm6150l-rpmh-regulators"
- "qcom,pmx55-rpmh-regulators"
-
-- qcom,pmic-id
- Usage: required
- Value type: <string>
- Definition: RPMh resource name suffix used for the regulators found on
- this PMIC. Typical values: "a", "b", "c", "d", "e", "f".
-
-- vdd-s1-supply
-- vdd-s2-supply
-- vdd-s3-supply
-- vdd-s4-supply
- Usage: optional (PM8998 and PM8005 only)
- Value type: <phandle>
- Definition: phandle of the parent supply regulator of one or more of the
- regulators for this PMIC.
-
-- vdd-s5-supply
-- vdd-s6-supply
-- vdd-s7-supply
-- vdd-s8-supply
-- vdd-s9-supply
-- vdd-s10-supply
-- vdd-s11-supply
-- vdd-s12-supply
-- vdd-s13-supply
-- vdd-l1-l27-supply
-- vdd-l2-l8-l17-supply
-- vdd-l3-l11-supply
-- vdd-l4-l5-supply
-- vdd-l6-supply
-- vdd-l7-l12-l14-l15-supply
-- vdd-l9-supply
-- vdd-l10-l23-l25-supply
-- vdd-l13-l19-l21-supply
-- vdd-l16-l28-supply
-- vdd-l18-l22-supply
-- vdd-l20-l24-supply
-- vdd-l26-supply
-- vin-lvs-1-2-supply
- Usage: optional (PM8998 only)
- Value type: <phandle>
- Definition: phandle of the parent supply regulator of one or more of the
- regulators for this PMIC.
-
-- vdd-bob-supply
- Usage: optional (PMI8998 only)
- Value type: <phandle>
- Definition: BOB regulator parent supply phandle
-
-===============================
-Second Level Nodes - Regulators
-===============================
-
-- qcom,always-wait-for-ack
- Usage: optional
- Value type: <empty>
- Definition: Boolean flag which indicates that the application processor
- must wait for an ACK or a NACK from RPMh for every request
- sent for this regulator including those which are for a
- strictly lower power state.
-
-Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt
-may also be used. regulator-initial-mode and regulator-allowed-modes may be
-specified for VRM regulators using mode values from
-include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass
-may be specified for BOB type regulators managed via VRM.
-regulator-allow-set-load may be specified for LDO type regulators managed via
-VRM.
-
-========
-Examples
-========
-
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-&apps_rsc {
- pm8998-rpmh-regulators {
- compatible = "qcom,pm8998-rpmh-regulators";
- qcom,pmic-id = "a";
-
- vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
-
- smps2 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- pm8998_s5: smps5 {
- regulator-min-microvolt = <1904000>;
- regulator-max-microvolt = <2040000>;
- };
-
- ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
- regulator-allow-set-load;
- };
-
- lvs1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
- pmi8998-rpmh-regulators {
- compatible = "qcom,pmi8998-rpmh-regulators";
- qcom,pmic-id = "b";
-
- bob {
- regulator-min-microvolt = <3312000>;
- regulator-max-microvolt = <3600000>;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_AUTO
- RPMH_REGULATOR_MODE_HPM>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
new file mode 100644
index 0000000..ac13c3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Regulators
+
+maintainers:
+ - David Collins <collinsd@xxxxxxxxxxxxxx>
+
+description: |
+ rpmh-regulator devices support PMIC regulator management via the Voltage
+ Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.
+ The APPS processor communicates with these hardware blocks via a
+ Resource State Coordinator (RSC) using command packets. The VRM allows
+ changing three parameters for a given regulator, enable state, output
+ voltage, and operating mode. The XOB allows changing only a single
+ parameter for a given regulator, its enable state. Despite its name,
+ the XOB is capable of controlling the enable state of any PMIC peripheral.
+ It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators
+ which have a fixed voltage and mode.
+
+ =======================
+ Required Node Structure
+ =======================
+
+ RPMh regulators must be described in two levels of device nodes. The first
+ level describes the PMIC containing the regulators and must reside within an
+ RPMh device node. The second level describes each regulator within the PMIC
+ which is to be used on the board. Each of these regulators maps to a single
+ RPMh resource.
+
+ The names used for regulator nodes must match those supported by a given
+ PMIC. Supported regulator node names are
+ For PM8005, smps1 - smps4
+ For PM8009, smps1 - smps2, ldo1 - ldo7
+ For PM8150, smps1 - smps10, ldo1 - ldo18
+ For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
+ For PM8350, smps1 - smps12, ldo1 - ldo10
+ For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
+ For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+ For PMI8998, bob
+ For PM6150, smps1 - smps5, ldo1 - ldo19
+ For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+ For PMX55, smps1 - smps7, ldo1 - ldo16
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8005-rpmh-regulators
+ - qcom,pm8009-rpmh-regulators
+ - qcom,pm8009-1-rpmh-regulators
+ - qcom,pm8150-rpmh-regulators
+ - qcom,pm8150l-rpmh-regulators
+ - qcom,pm8350-rpmh-regulators
+ - qcom,pm8350c-rpmh-regulators
+ - qcom,pm8998-rpmh-regulators
+ - qcom,pmi8998-rpmh-regulators
+ - qcom,pm6150-rpmh-regulators
+ - qcom,pm6150l-rpmh-regulators
+ - qcom,pmx55-rpmh-regulators
+
+ qcom,pmic-id:
+ description: |
+ RPMh resource name suffix used for the regulators found
+ on this PMIC.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [a, b, c, d, e, f]
+
+ qcom,always-wait-for-ack:
+ description: |
+ Boolean flag which indicates that the application processor
+ must wait for an ACK or a NACK from RPMh for every request
+ sent for this regulator including those which are for a
+ strictly lower power state.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ vdd-flash-supply:
+ description: Input supply phandle of flash.
+
+ vdd-rgb-supply:
+ description: Input supply phandle of rgb.
+
+ vin-lvs-1-2-supply:
+ description: Input supply phandle of one or more regulators.
+
+ vdd-bob-supply:
+ description: BOB regulator parent supply phandle.
+
+ bob:
+ type: object
+ $ref: "regulator.yaml#"
+ description: BOB regulator node.
+
+patternProperties:
+ "^vdd-s([0-9]+)-supply$":
+ description: Input supply phandle(s) of one or more regulators.
+
+ "^vdd-(l[0-9]+[-]){1,5}supply$":
+ description: Input supply phandle(s) of one or more regulators.
+
+ "^(smps|ldo|lvs)[0-9]+$":
+ type: object
+ $ref: "regulator.yaml#"
+ description: smps/ldo regulator nodes(s).
+
+additionalProperties: false
+
+required:
+ - compatible
+ - qcom,pmic-id
+
+examples:
+ - |
+ #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
+
+ smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_AUTO
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+...
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation