Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
From: Andy Shevchenko
Date: Wed Mar 31 2021 - 11:41:43 EST
On Tue, Mar 30, 2021 at 6:33 PM Henning Schild
<henning.schild@xxxxxxxxxxx> wrote:
> Am Tue, 30 Mar 2021 15:41:53 +0300
> schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:
> > On Tue, Mar 30, 2021 at 3:35 PM Henning Schild
> > <henning.schild@xxxxxxxxxxx> wrote:
> > > Am Tue, 30 Mar 2021 15:15:16 +0300
> > > schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:
> > > > On Tue, Mar 30, 2021 at 2:58 PM Henning Schild
> > > > <henning.schild@xxxxxxxxxxx> wrote:
> > > > > Am Tue, 30 Mar 2021 14:04:35 +0300
> > > > > schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:
> > > > > > On Mon, Mar 29, 2021 at 8:59 PM Henning Schild
> > > > > > <henning.schild@xxxxxxxxxxx> wrote:
> >
> > > > > > > +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> > > > > > > + {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
> > > > > > > + {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
> > > > > > > + {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
> > > > > > > + {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
> > > > > > > + {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
> > > > > > > + {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
> > > > > > > + { }
> > > > > > > +};
> > > > > >
> > > > > > It seems to me like poking GPIO controller registers directly.
> > > > > > This is not good. The question still remains: Can we simply
> > > > > > register a GPIO (pin control) driver and use an LED GPIO
> > > > > > driver with an additional board file that instantiates it?
> > > > >
> > > > > I wrote about that in reply to the cover letter. My view is
> > > > > still that it would be an abstraction with only one user, just
> > > > > causing work and likely not ending up as generic as it might
> > > > > eventually have to be.
> > > > >
> > > > > The region is reserved, not sure what the problem with the
> > > > > "poking" is.
> > > >
> > > >
> > > > > Maybe i do not understand all the benefits of such a split at
> > > > > this point in time. At the moment i only see work with hardly
> > > > > any benefit, not just work for me but also for maintainers. I
> > > > > sure do not mean to be ignorant. Maybe you go into details and
> > > > > convince me or we wait for other peoples opinions on how to
> > > > > proceed, maybe there is a second user that i am not aware of?
> > > > > Until i am convinced otherwise i will try to argue that a
> > > > > single-user-abstraction is needless work/code, and should be
> > > > > done only when actually needed.
> > > >
> > > > I have just read your messages (there is a cover letter and
> > > > additional email which was sent lately).
> > > >
> > > > I would like to know what the CPU model number on that board is.
> > > > Than we can continue to see what possibilities we have here.
> > >
> > > I guess we are talking about the one that uses memory mapped, that
> > > is called an "IPC127E" and seems to have either Intel Atom E3940 or
> > > E3930 which seems to be Apollo Lake.
> >
> > Yep. And now the question, in my patch series you should have got the
> > apollolake-pinctrl driver loaded (if not, we have to investigate why
> > it's not being instantiated). This will give you a read GPIO driver.
>
> Ok, so there is the existing driver i asked about several times. Thanks
> for pointing it out.
If you remember, I asked you about the chip twice :-)
I assumed that we were talking about Apollo Lake and that's why I
insisted that the driver is in the kernel source tree.
> > So, you may use regular LED GPIO on top of it
> > (https://elixir.bootlin.com/linux/latest/source/drivers/leds/leds-gpio.c).
> > I would like to understand why it can't be achieved.
>
> Will have a look. Unfortunately this one box is missing in my personal
> collection, but let us assume that one can be converted to that
> existing driver.
OK!
> I guess that will still mean the PIO-based part of the LED driver will
> have to stay as is.
Probably yes. I haven't looked into that part and I have no idea
what's going on on that platform(s).
--
With Best Regards,
Andy Shevchenko