[PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@xxxxxx>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 96 ++--------------------------
 1 file changed, 5 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..35d12979cdf4 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
@@ -132,7 +129,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +139,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -221,20 +175,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -257,7 +204,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,30 +213,6 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
@@ -312,22 +235,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1