Re: [PATCH -next v2] drm/bridge: lt8912b: Add header file <linux/gpio/consumer.h>
From: Robert Foss
Date: Thu Apr 08 2021 - 04:30:35 EST
Hey Zhang,
On Thu, 8 Apr 2021 at 05:54, Zhang Jianhua <zhangjianhua18@xxxxxxxxxx> wrote:
>
> If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
> compiling lontium-lt8912b.c
>
> drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
> ‘lt8912_hard_power_on’:
> drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
> declaration of function ‘gpiod_set_value_cansleep’; did you mean
> ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
> gpiod_set_value_cansleep(lt->gp_reset, 0);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> gpio_set_value_cansleep
> drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
> drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
> declaration of function ‘devm_gpiod_get_optional’; did you mean
> ‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
> gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> ^~~~~~~~~~~~~~~~~~~~~~~
> devm_gpio_request_one
> drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
> undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
> gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> ^~~~~~~~~~~~~~
> GPIOF_INIT_HIGH
>
> Signed-off-by: Zhang Jianhua <zhangjianhua18@xxxxxxxxxx>
> ---
> v2:
> - add header file <linux/gpio/consumer.h> for lontium-lt8912b.c instead
> of add config dependence for CONFIG_DRM_LONTIUM_LT8912B
> ---
> drivers/gpu/drm/bridge/lontium-lt8912b.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c
> index 61491615bad0..79845b3b19e1 100644
> --- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
> +++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
> @@ -3,6 +3,7 @@
> * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> */
>
> +#include <linux/gpio/consumer.h>
> #include <linux/device.h>
> #include <linux/delay.h>
> #include <linux/i2c.h>
Add this #include in alphabetical order. With this change, feel free
to add my r-b.
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
> --
> 2.17.1
>