[PATCH v4 0/3] Move kernel mapping outside the linear mapping

From: Alexandre Ghiti
Date: Fri Apr 09 2021 - 02:15:26 EST


I decided to split sv48 support in small series to ease the review.

This patchset pushes the kernel mapping (modules and BPF too) to the last
4GB of the 64bit address space, this allows to:
- implement relocatable kernel (that will come later in another
patchset) that requires to move the kernel mapping out of the linear
mapping to avoid to copy the kernel at a different physical address.
- have a single kernel that is not relocatable (and then that avoids the
performance penalty imposed by PIC kernel) for both sv39 and sv48.

The first patch implements this behaviour, the second patch introduces a
documentation that describes the virtual address space layout of the 64bit
kernel and the last patch is taken from my sv48 series where I simply added
the dump of the modules/kernel/BPF mapping.

I removed the Reviewed-by on the first patch since it changed enough from
last time and deserves a second look.

Changes in v4:
- Fix BUILTIN_DTB since we used __va to obtain the virtual address of the
builtin DTB which returns a linear mapping address, and then we use
this address before setup_vm_final installs the linear mapping: this
is not possible anymore since the kernel does not lie inside the
linear mapping anymore.

Changes in v3:
- Fix broken nommu build as reported by kernel test robot by protecting
the kernel mapping only in 64BIT and MMU configs, by reverting the
introduction of load_sz_pmd and by not exporting load_sz/load_pa anymore
since they were not initialized in nommu config.

Changes in v2:
- Fix documentation about direct mapping size which is 124GB instead
of 126GB.
- Fix SPDX missing header in documentation.
- Fix another checkpatch warning about EXPORT_SYMBOL which was not
directly below variable declaration.

Alexandre Ghiti (3):
riscv: Move kernel mapping outside of linear mapping
Documentation: riscv: Add documentation that describes the VM layout
riscv: Prepare ptdump for vm layout dynamic addresses

Alexandre Ghiti (3):
riscv: Move kernel mapping outside of linear mapping
Documentation: riscv: Add documentation that describes the VM layout
riscv: Prepare ptdump for vm layout dynamic addresses

Documentation/riscv/index.rst | 1 +
Documentation/riscv/vm-layout.rst | 63 +++++++++++++++++++++
arch/riscv/boot/loader.lds.S | 3 +-
arch/riscv/include/asm/page.h | 17 +++++-
arch/riscv/include/asm/pgtable.h | 37 ++++++++----
arch/riscv/include/asm/set_memory.h | 1 +
arch/riscv/kernel/head.S | 3 +-
arch/riscv/kernel/module.c | 6 +-
arch/riscv/kernel/setup.c | 5 ++
arch/riscv/kernel/vmlinux.lds.S | 3 +-
arch/riscv/mm/fault.c | 13 +++++
arch/riscv/mm/init.c | 87 ++++++++++++++++++++++-------
arch/riscv/mm/kasan_init.c | 9 +++
arch/riscv/mm/physaddr.c | 2 +-
arch/riscv/mm/ptdump.c | 67 ++++++++++++++++++----
15 files changed, 265 insertions(+), 52 deletions(-)
create mode 100644 Documentation/riscv/vm-layout.rst

--
2.20.1