[PATCH net-next 1/3] dt-bindings: net: add new properties for of_get_mac_address from nvmem

[Joakim Zhang]

From: Fugang Duan <fugang.duan@xxxxxxx>

Currently, of_get_mac_address supports NVMEM, some platforms
MAC address that read from NVMEM efuse requires to swap bytes
order, so add new property "nvmem_macaddr_swap" to specify the
behavior. If the MAC address is valid from NVMEM, add new property
"nvmem-mac-address" in ethernet node.

Update these two properties in the binding documentation.

Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
---
 .../bindings/net/ethernet-controller.yaml          | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index e8f04687a3e0..c868c295aabf 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -32,6 +32,15 @@ properties:
       - minItems: 6
         maxItems: 6
 
+  nvmem-mac-address:
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint8-array
+      - minItems: 6
+        maxItems: 6
+    description:
+      Specifies the MAC address that was read from nvmem-cells and dynamically
+      add the property in device node;
+
   max-frame-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -52,6 +61,11 @@ properties:
   nvmem-cell-names:
     const: mac-address
 
+  nvmem_macaddr_swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      swap bytes order for the 6 bytes of MAC address
+
   phy-connection-type:
     description:
       Specifies interface type between the Ethernet device and a physical
-- 
2.17.1