Re: [PATCH 4/4] ARM: dts: Fix-up EMMC2 controller's frequency

[Nicolas Saenz Julienne]

Hi Al,

On Wed, 2021-04-07 at 16:37 -0400, Alan Cooper wrote:
> Nicolas,
> 
> I got a better description of the failure and it looks like the bus
> clock needs to be limited to 300KHz for a 500MHz core clock.
> What's happening is that an internal reset sequence is needed after a
> command timeout and the reset signal needs to be asserted for at least
> 2 ticks of the bus clock. This is done using a 12 bit counter clocked
> by the core clock. That means a 500MHz core clock produces a 122KHz
> reset signal which is too fast for 2 ticks of the 200KHz bus clock
> (100KHz) but is okay for the 300KHz (150Khz) bus clock.

Thanks for the info. I'll work something out.

Regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part