[PATCH v3 1/8] dt-bindings: don't use ../dir for doc references

[Mauro Carvalho Chehab]

As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.

So, replace them by the full patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 .../input/touchscreen/resistive-adc-touch.txt    |  2 +-
 .../devicetree/bindings/mfd/motorola-cpcap.txt   | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
index 51456c0e9a27..fee0da12474e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -5,7 +5,7 @@ Required properties:
  - compatible: must be "resistive-adc-touch"
 The device must be connected to an ADC device that provides channels for
 position measurement and optional pressure.
-Refer to ../iio/iio-bindings.txt for details
+Refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details
  - iio-channels: must have at least two channels connected to an ADC device.
 These should correspond to the channels exposed by the ADC device and should
 have the right index as the ADC device registers them. These channels
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index 5ddcc8f4febc..ebdccfb600b9 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -16,14 +16,14 @@ Optional subnodes:
 The sub-functions of CPCAP get their own node with their own compatible values,
 which are described in the following files:
 
-- ../power/supply/cpcap-battery.txt
-- ../power/supply/cpcap-charger.txt
-- ../regulator/cpcap-regulator.txt
-- ../phy/phy-cpcap-usb.txt
-- ../input/cpcap-pwrbutton.txt
-- ../rtc/cpcap-rtc.txt
-- ../leds/leds-cpcap.txt
-- ../iio/adc/cpcap-adc.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
 
 The only exception is the audio codec. Instead of a compatible value its
 node must be named "audio-codec".
-- 
2.30.2