[PATCH v4 2/2] pwm: visconti: Add Toshiba Visconti SoC PWM support

[Nobuhiro Iwamatsu]

Add driver for the PWM controller on Toshiba Visconti ARM SoC.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
---
 drivers/pwm/Kconfig        |   9 ++
 drivers/pwm/Makefile       |   1 +
 drivers/pwm/pwm-visconti.c | 188 +++++++++++++++++++++++++++++++++++++
 3 files changed, 198 insertions(+)
 create mode 100644 drivers/pwm/pwm-visconti.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 9a4f66ae8070..8ae68d6203fb 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -601,6 +601,15 @@ config PWM_TWL_LED
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-twl-led.
 
+config PWM_VISCONTI
+	tristate "Toshiba Visconti PWM support"
+	depends on ARCH_VISCONTI || COMPILE_TEST
+	help
+	  PWM Subsystem driver support for Toshiba Visconti SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-visconti.
+
 config PWM_VT8500
 	tristate "vt8500 PWM support"
 	depends on ARCH_VT8500 || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 6374d3b1d6f3..d43b1e17e8e1 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -56,4 +56,5 @@ obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
 obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
+obj-$(CONFIG_PWM_VISCONTI)	+= pwm-visconti.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
diff --git a/drivers/pwm/pwm-visconti.c b/drivers/pwm/pwm-visconti.c
new file mode 100644
index 000000000000..99d83f94ed86
--- /dev/null
+++ b/drivers/pwm/pwm-visconti.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Toshiba Visconti pulse-width-modulation controller driver
+ *
+ * Copyright (c) 2020 TOSHIBA CORPORATION
+ * Copyright (c) 2020 Toshiba Electronic Devices & Storage Corporation
+ *
+ * Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
+#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
+#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
+
+#define PIPGM_PWMC_PWMACT		BIT(5)
+#define PIPGM_PWMC_CLK_MASK		GENMASK(1, 0)
+#define PIPGM_PWMC_POLARITY_MASK	GENMASK(5, 5)
+
+struct visconti_pwm_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+};
+
+static inline struct visconti_pwm_chip *to_visconti_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct visconti_pwm_chip, chip);
+}
+
+static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct visconti_pwm_chip *priv = to_visconti_chip(chip);
+	u32 period, duty_cycle, pwmc0;
+
+	/*
+	 * pwmc is a 2-bit divider for the input clock running at 1 MHz.
+	 * When the settings of the PWM are modified, the new values are shadowed in hardware until
+	 * the period register (PCSR) is written and the currently running period is completed. This
+	 * way the hardware switches atomically from the old setting to the new.
+	 * Also, disabling the hardware completes the currently running period and keeps the output
+	 * at low level at all times.
+	 */
+	if (!state->enabled) {
+		writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
+		return 0;
+	}
+
+	/*
+	 * The biggest period the hardware can provide is
+	 *	(0xffff << 3) * 1000 ns
+	 * This value fits easily in an u32, so simplify the maths by
+	 * capping the values to 32 bit integers.
+	 */
+	if (state->period > (0xffff << 3) * 1000)
+		period = (0xffff << 3) * 1000;
+	else
+		period = state->period;
+
+	if (state->duty_cycle > period)
+		duty_cycle = period;
+	else
+		duty_cycle = state->duty_cycle;
+
+	/*
+	 * The input clock runs fixed at 1 MHz, so we have only
+	 * microsecond resolution and so can divide by
+	 * NSEC_PER_SEC / CLKFREQ = 1000 without loosing precision.
+	 */
+	period /= 1000;
+	duty_cycle /= 1000;
+
+	if (!period)
+		return -ERANGE;
+
+	/*
+	 * PWMC controls a divider that divides the input clk by a
+	 * power of two between 1 and 8. As a smaller divider yields
+	 * higher precision, pick the smallest possible one.
+	 */
+	if (period > 0xffff) {
+		pwmc0 = ilog2(period >> 16);
+		BUG_ON(pwmc0 > 3);
+	} else
+		pwmc0 = 0;
+
+	period >>= pwmc0;
+	duty_cycle >>= pwmc0;
+
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		pwmc0 |= PIPGM_PWMC_PWMACT;
+	writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
+	writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
+	writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
+
+	return 0;
+}
+
+static void visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				   struct pwm_state *state)
+{
+	struct visconti_pwm_chip *priv = chip_to_priv(chip);
+	u32 period, duty, pwmc0, pwmc0_clk;
+
+	period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
+	if (period)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
+	pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
+	pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
+
+	state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
+	state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
+	if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		state->polarity = PWM_POLARITY_NORMAL;
+}
+
+static const struct pwm_ops visconti_pwm_ops = {
+	.apply = visconti_pwm_apply,
+	.get_state = visconti_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int visconti_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct visconti_pwm_chip *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &visconti_pwm_ops;
+	priv->chip.npwm = 4;
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
+
+	return 0;
+}
+
+static int visconti_pwm_remove(struct platform_device *pdev)
+{
+	struct visconti_pwm_chip *priv = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id visconti_pwm_of_match[] = {
+	{ .compatible = "toshiba,visconti-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
+
+static struct platform_driver visconti_pwm_driver = {
+	.driver = {
+		.name = "pwm-visconti",
+		.of_match_table = visconti_pwm_of_match,
+	},
+	.probe = visconti_pwm_probe,
+	.remove = visconti_pwm_remove,
+};
+module_platform_driver(visconti_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>");
+MODULE_ALIAS("platform:pwm-visconti");
-- 
2.30.0.rc2