[PATCH 5.11 085/210] scsi: pm80xx: Fix chip initialization failure
From: Greg Kroah-Hartman
Date: Mon Apr 12 2021 - 05:31:14 EST
From: Viswas G <Viswas.G@xxxxxxxxxxxxx>
commit 65df7d1986a1909a0869419919e7d9c78d70407e upstream.
Inbound and outbound queues were not properly configured and that lead to
MPI configuration failure.
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Cc: stable@xxxxxxxxxxxxxxx # 5.10+
Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@xxxxxxxxxxxxxxxxx
Reported-and-tested-by: Ash Izat <ash@xxxxxx>
Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -223,7 +223,7 @@ static void init_default_table_values(st
PM8001_EVENT_LOG_SIZE;
pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option = 0x01;
pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01;
- for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
@@ -249,7 +249,7 @@ static void init_default_table_values(st
pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
}
- for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
@@ -671,9 +671,9 @@ static int pm8001_chip_init(struct pm800
read_outbnd_queue_table(pm8001_ha);
/* update main config table ,inbound table and outbound table */
update_main_config_table(pm8001_ha);
- for (i = 0; i < PM8001_MAX_INB_NUM; i++)
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
update_inbnd_queue_table(pm8001_ha, i);
- for (i = 0; i < PM8001_MAX_OUTB_NUM; i++)
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
update_outbnd_queue_table(pm8001_ha, i);
/* 8081 controller donot require these operations */
if (deviceid != 0x8081 && deviceid != 0x0042) {