[PATCH] net: phy: marvell: fix detection of PHY on Topaz switches
From: Pali Rohár
Date: Mon Apr 12 2021 - 08:15:24 EST
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.
This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.
This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.
Define a representative model for each switch family and add a mapping
table for constructing PHY IDs for the internal PHYs (since they don't
have a model number).
Create a new PHY ID and a new PHY driver for Topaz' internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.
Prior this change Topaz's internal PHY is detected by kernel as:
PHY [...] driver [Marvell 88E6390] (irq=63)
And afterwards as:
PHY [...] driver [Marvell 88E6341 Family] (irq=63)
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>
---
drivers/net/dsa/mv88e6xxx/chip.c | 56 ++++++++++++++++++++++----------
drivers/net/dsa/mv88e6xxx/chip.h | 2 ++
drivers/net/phy/marvell.c | 32 ++++++++++++++++--
include/linux/marvell_phy.h | 5 +--
4 files changed, 72 insertions(+), 23 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 903d619e08ed..e602c9816aee 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3026,6 +3026,8 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
return err;
}
+static u16 mv88e6xxx_physid_for_family(enum mv88e6xxx_family family);
+
static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
{
struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
@@ -3040,24 +3042,9 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
mv88e6xxx_reg_unlock(chip);
- if (reg == MII_PHYSID2) {
- /* Some internal PHYs don't have a model number. */
- if (chip->info->family != MV88E6XXX_FAMILY_6165)
- /* Then there is the 6165 family. It gets is
- * PHYs correct. But it can also have two
- * SERDES interfaces in the PHY address
- * space. And these don't have a model
- * number. But they are not PHYs, so we don't
- * want to give them something a PHY driver
- * will recognise.
- *
- * Use the mv88e6390 family model number
- * instead, for anything which really could be
- * a PHY,
- */
- if (!(val & 0x3f0))
- val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
- }
+ /* Some internal PHYs don't have a model number. */
+ if (reg == MII_PHYSID2 && !(val & 0x3f0))
+ val |= mv88e6xxx_physid_for_family(chip->info->family);
return err ? err : val;
}
@@ -5244,6 +5231,39 @@ static const struct mv88e6xxx_info *mv88e6xxx_lookup_info(unsigned int prod_num)
return NULL;
}
+/* This table contains representative model for every family */
+static const enum mv88e6xxx_model family_model_table[] = {
+ [MV88E6XXX_FAMILY_6095] = MV88E6095,
+ [MV88E6XXX_FAMILY_6097] = MV88E6097,
+ [MV88E6XXX_FAMILY_6185] = MV88E6185,
+ [MV88E6XXX_FAMILY_6250] = MV88E6250,
+ [MV88E6XXX_FAMILY_6320] = MV88E6320,
+ [MV88E6XXX_FAMILY_6341] = MV88E6341,
+ [MV88E6XXX_FAMILY_6351] = MV88E6351,
+ [MV88E6XXX_FAMILY_6352] = MV88E6352,
+ [MV88E6XXX_FAMILY_6390] = MV88E6390,
+};
+static_assert(ARRAY_SIZE(family_model_table) == MV88E6XXX_FAMILY_LAST);
+
+static u16 mv88e6xxx_physid_for_family(enum mv88e6xxx_family family)
+{
+ enum mv88e6xxx_model model;
+
+ /* 6165 family gets it's PHYs correct. But it can also have two SERDES
+ * interfaces in the PHY address space. And these don't have a model
+ * number. But they are not PHYs, so we don't want to give them
+ * something a PHY driver will recognise.
+ */
+ if (family == MV88E6XXX_FAMILY_6165)
+ return 0;
+
+ model = family_model_table[family];
+ if (model == MV88E_NA)
+ return 0;
+
+ return mv88e6xxx_table[model].prod_num >> 4;
+}
+
static int mv88e6xxx_detect(struct mv88e6xxx_chip *chip)
{
const struct mv88e6xxx_info *info;
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index a57c8886f3ac..70c736788a68 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -47,6 +47,7 @@ enum mv88e6xxx_frame_mode {
/* List of supported models */
enum mv88e6xxx_model {
+ MV88E_NA = 0, /* must be zero */
MV88E6085,
MV88E6095,
MV88E6097,
@@ -90,6 +91,7 @@ enum mv88e6xxx_family {
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */
+ MV88E6XXX_FAMILY_LAST
};
struct mv88e6xxx_ops;
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e26a5d663f8a..8018ddf7f316 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -3021,9 +3021,34 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
},
{
- .phy_id = MARVELL_PHY_ID_88E6390,
+ .phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .name = "Marvell 88E6390",
+ .name = "Marvell 88E6341 Family",
+ /* PHY_GBIT_FEATURES */
+ .flags = PHY_POLL_CABLE_TEST,
+ .probe = m88e1510_probe,
+ .config_init = marvell_config_init,
+ .config_aneg = m88e6390_config_aneg,
+ .read_status = marvell_read_status,
+ .config_intr = marvell_config_intr,
+ .handle_interrupt = marvell_handle_interrupt,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .read_page = marvell_read_page,
+ .write_page = marvell_write_page,
+ .get_sset_count = marvell_get_sset_count,
+ .get_strings = marvell_get_strings,
+ .get_stats = marvell_get_stats,
+ .get_tunable = m88e1540_get_tunable,
+ .set_tunable = m88e1540_set_tunable,
+ .cable_test_start = marvell_vct7_cable_test_start,
+ .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
+ .cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E6390 Family",
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
.probe = m88e6390_probe,
@@ -3107,7 +3132,8 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
{ MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1545, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
- { MARVELL_PHY_ID_88E6390, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E6341_FAMILY, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E6390_FAMILY, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1340S, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1548P, MARVELL_PHY_ID_MASK },
{ }
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 52b1610eae68..c544b70dfbd2 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -28,11 +28,12 @@
/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
-/* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
+/* These Ethernet switch families contain embedded PHYs, but they do
* not have a model ID. So the switch driver traps reads to the ID2
* register and returns the switch family ID
*/
-#define MARVELL_PHY_ID_88E6390 0x01410f90
+#define MARVELL_PHY_ID_88E6341_FAMILY 0x01410f41
+#define MARVELL_PHY_ID_88E6390_FAMILY 0x01410f90
#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4)
--
2.20.1