Re: [PATCH net-next 1/2] net: phy: marvell-88x2222: check that link is operational

[Marek Behún]

On Mon, 12 Apr 2021 15:16:59 +0300
Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx> wrote:

> Some SFP modules uses RX_LOS for link indication. In such cases link
> will be always up, even without cable connected. RX_LOS changes will
> trigger link_up()/link_down() upstream operations. Thus, check that SFP
> link is operational before actual read link status.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx>
> ---
>  drivers/net/phy/marvell-88x2222.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
> index eca8c2f20684..fb285ac741b2 100644
> --- a/drivers/net/phy/marvell-88x2222.c
> +++ b/drivers/net/phy/marvell-88x2222.c
> @@ -51,6 +51,7 @@
>  struct mv2222_data {
>  	phy_interface_t line_interface;
>  	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
> +	bool sfp_link;
>  };
>  
>  /* SFI PMA transmit enable */
> @@ -148,6 +149,9 @@ static int mv2222_read_status(struct phy_device *phydev)
>  	phydev->speed = SPEED_UNKNOWN;
>  	phydev->duplex = DUPLEX_UNKNOWN;
>  
> +	if (!priv->sfp_link)
> +		return 0;
> +

So if SFP is not used at all, if this PHY is used in a different
usecase, this function will always return 0? Is this correct?

>  	if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
>  		link = mv2222_read_status_10g(phydev);
>  	else
> @@ -446,9 +450,31 @@ static void mv2222_sfp_remove(void *upstream)
>  	linkmode_zero(priv->supported);
>  }
>  
> +static void mv2222_sfp_link_up(void *upstream)
> +{
> +	struct phy_device *phydev = upstream;
> +	struct mv2222_data *priv;
> +
> +	priv = (struct mv2222_data *)phydev->priv;
> +
> +	priv->sfp_link = true;
> +}
> +
> +static void mv2222_sfp_link_down(void *upstream)
> +{
> +	struct phy_device *phydev = upstream;
> +	struct mv2222_data *priv;
> +
> +	priv = (struct mv2222_data *)phydev->priv;

This cast is redundant since the phydev->priv is (void*). You can cast
(void*) to (struct ... *).

You can also just use
	struct mv2222_data *priv = phydev->priv;

> +
> +	priv->sfp_link = false;
> +}
> +
>  static const struct sfp_upstream_ops sfp_phy_ops = {
>  	.module_insert = mv2222_sfp_insert,
>  	.module_remove = mv2222_sfp_remove,
> +	.link_up = mv2222_sfp_link_up,
> +	.link_down = mv2222_sfp_link_down,
>  	.attach = phy_sfp_attach,
>  	.detach = phy_sfp_detach,
>  };