[PATCH v2 08/12] usb: dwc2: Update exit clock gating when port is resumed
From: Artur Petrosyan
Date: Tue Apr 13 2021 - 03:37:13 EST
Updates the implementation of exiting clock gating mode
when core receives port resume.
Instead of setting the required bit fields of the registers
inline, called the "dwc2_host_exit_clock_gating()" function.
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
---
Changes in v2:
- None
drivers/usb/dwc2/hcd.c | 29 ++++-------------------------
1 file changed, 4 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e1225fe6c61a..8a42675ab94e 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3359,8 +3359,6 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
int dwc2_port_resume(struct dwc2_hsotg *hsotg)
{
unsigned long flags;
- u32 hprt0;
- u32 pcgctl;
int ret = 0;
spin_lock_irqsave(&hsotg->lock, flags);
@@ -3374,33 +3372,14 @@ int dwc2_port_resume(struct dwc2_hsotg *hsotg)
break;
case DWC2_POWER_DOWN_PARAM_HIBERNATION:
case DWC2_POWER_DOWN_PARAM_NONE:
- default:
/*
- * If power_down is supported, Phy clock is already resumed
- * after registers restore.
+ * If not hibernation nor partial power down are supported,
+ * port resume is done using the clock gating programming flow.
*/
- if (!hsotg->params.power_down) {
- pcgctl = dwc2_readl(hsotg, PCGCTL);
- pcgctl &= ~PCGCTL_STOPPCLK;
- dwc2_writel(hsotg, pcgctl, PCGCTL);
- spin_unlock_irqrestore(&hsotg->lock, flags);
- msleep(20);
- spin_lock_irqsave(&hsotg->lock, flags);
- }
-
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- hprt0 &= ~HPRT0_SUSP;
- dwc2_writel(hsotg, hprt0, HPRT0);
spin_unlock_irqrestore(&hsotg->lock, flags);
-
- msleep(USB_RESUME_TIMEOUT);
-
+ dwc2_host_exit_clock_gating(hsotg, 0);
spin_lock_irqsave(&hsotg->lock, flags);
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 &= ~(HPRT0_RES | HPRT0_SUSP);
- dwc2_writel(hsotg, hprt0, HPRT0);
- hsotg->bus_suspended = false;
+ break;
}
spin_unlock_irqrestore(&hsotg->lock, flags);
--
2.25.1