Re: [PATCH RFC net-next 0/3] Multi-CPU DSA support

[Marek Behun]

On Tue, 13 Apr 2021 20:16:24 +0200
Tobias Waldekranz <tobias@xxxxxxxxxxxxxx> wrote:

> You could imagine a different mode in which the DSA driver would receive
> the bucket allocation from the bond/team driver (which in turn could
> come all the way from userspace). Userspace could then implement
> whatever strategy it wants to maximize utilization, though still bound
> by the limitations of the hardware in terms of fields considered during
> hashing of course.

The problem is that even with the ability to change the bucket
configuration however we want it still can happen with non-trivial
probability that all (src,dst) pairs on the network will hash to one
bucket.

The probability of that happening is 1/(8^(n-1)) for n (src,dst) pairs.

On Turris Omnia the most common configuration is that the switch ports
are bridged.

If the user plugs only two devices into the lan ports, one would expect
that both devices could utilize 1 gbps each. In this case there is
1/8 probability that both devices would hash to the same bucket. It is
quite bad if multi-CPU upload won't work for 12.5% of our customers that
are using our device in this way.

So if there is some reasonable solution how to implement multi-CPU via
the port vlan mask, I will try to pursue this.

Marek