[PATCH 02/15] usb: dwc2: Reset DEVADDR after exiting gadget hibernation.

[Artur Petrosyan]

Initially resetting device address was done in dwc2_hsotg_irq()
interrupt handler. However, when core is hibernated USB RESET
is not handled in dwc2_hsotg_irq() handler, instead USB RESET
interrupt is handled in dwc2_handle_gpwrdn_intr() handler.

- Added reset device address to zero when core exits from gadget
  hibernation.

Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/gadget.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 2f50f3e62caa..e6bb1bdb2760 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -5305,6 +5305,10 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
 	dwc2_writel(hsotg, dr->dcfg, DCFG);
 	dwc2_writel(hsotg, dr->dctl, DCTL);
 
+	/* On USB Reset, reset device address to zero */
+	if (reset)
+		dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
+
 	/* De-assert Wakeup Logic */
 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 	gpwrdn &= ~GPWRDN_PMUACTV;
-- 
2.25.1