[PATCH 4.19 08/13] net: phy: broadcom: Only advertise EEE for supported modes

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

commit c056d480b40a68f2520ccc156c7fae672d69d57d upstream

We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.

Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/bcm-phy-lib.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -198,7 +198,7 @@ EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
 
 int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
 {
-	int val;
+	int val, mask = 0;
 
 	/* Enable EEE at PHY level */
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
@@ -217,10 +217,15 @@ int bcm_phy_set_eee(struct phy_device *p
 	if (val < 0)
 		return val;
 
+	if (phydev->supported & SUPPORTED_1000baseT_Full)
+		mask |= MDIO_EEE_1000T;
+	if (phydev->supported & SUPPORTED_100baseT_Full)
+		mask |= MDIO_EEE_100TX;
+
 	if (enable)
-		val |= (MDIO_EEE_100TX | MDIO_EEE_1000T);
+		val |= mask;
 	else
-		val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T);
+		val &= ~mask;
 
 	phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);