[PATCH v2] riscv/kprobe: Restore local irqflag if kprobe is cancelled
From: Liao Chang
Date: Fri Apr 16 2021 - 04:27:34 EST
The execution of sys_read end up hitting a BUG_ON() in __find_get_block after
installing probe at sys_read via kprobe, the BUG message like the following:
[ 65.708663] ------------[ cut here ]------------
[ 65.709987] kernel BUG at fs/buffer.c:1251!
[ 65.711283] Kernel BUG [#1]
[ 65.712032] Modules linked in:
[ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1
[ 65.714407] Hardware name: riscv-virtio,qemu (DT)
[ 65.715696] epc : __find_get_block+0x218/0x2c8
[ 65.716835] ra : __getblk_gfp+0x1c/0x4a
[ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930
[ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038
[ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960
[ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a
[ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040
[ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000
[ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008
[ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8
[ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008
[ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f
[ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000
[ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 65.734901] Call Trace:
[ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8
[ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6
[ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a
[ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c
[ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e
[ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66
[ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da
[ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150
[ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246
[ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114
[ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea
[ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a
[ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2
[ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8
[ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16
[ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2
[ 65.738858] ---[ end trace fe93f985456c935d ]---
A simple reproducer looks like:
echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events
echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
cat trace
Here's what happens to hit that BUG_ON():
If instruction being single stepped caused page fault, the
kprobe is cancelled to let the page fault handler continues
as normal page fault. But the local irqflags are disabled,
so CPU will restore 'sstatus' with 'SIE' masked. After page
fault is serviced, the kprobe is triggered again, we overwrite
the saved irqflag by calling kprobe_save_local_irqflag(). Note,
'SIE' is masked in this new saved irqflag. After kprobe is
serviced, the CPU 'sstatus' is restored with 'SIE' masked.
This overwritten 'sstatus' cause BUG_ON() in __find_get_block.
This bug is already fixed on arm64 by Jisheng Zhang.
Fixes: c22b0bcb1dd02 ("riscv: Add kprobes supported")
Signed-off-by: Liao Chang <liaochang1@xxxxxxxxxx>
---
Changes in v2:
- Reorganize commit message.
arch/riscv/kernel/probes/kprobes.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
index 7e2c78e2ca6b..d71f7c49a721 100644
--- a/arch/riscv/kernel/probes/kprobes.c
+++ b/arch/riscv/kernel/probes/kprobes.c
@@ -260,8 +260,10 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr)
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
- else
+ else {
+ kprobes_restore_local_irqflag(kcb, regs);
reset_current_kprobe();
+ }
break;
case KPROBE_HIT_ACTIVE:
--
2.17.1