[PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver

[Neil Armstrong]

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.

On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.

Jernej Skrabec (1):
  drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC
    driver

Neil Armstrong (1):
  drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
 drivers/gpu/drm/meson/meson_dw_hdmi.c     | 1 +
 include/drm/bridge/dw_hdmi.h              | 2 ++
 3 files changed, 4 insertions(+), 1 deletion(-)

-- 
2.25.1