[PATCH v4 12/27] drm/bridge: ti-sn65dsi86: Cleanup managing of drvdata

[Douglas Anderson]

Let's:
- Set the drvdata as soon as it's allocated. This just sets up a
  pointer so there's no downside here.
- Remove the useless call to i2c_set_clientdata() which is literally
  the same thing as dev_set_drvdata().

No functional changes intended.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

(no changes since v1)

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 2cbf619fbd27..a200e88fd006 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -1238,6 +1238,8 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
 	pdata = devm_kzalloc(dev, sizeof(struct ti_sn65dsi86), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
+	dev_set_drvdata(dev, pdata);
+	pdata->dev = dev;
 
 	pdata->regmap = devm_regmap_init_i2c(client,
 					     &ti_sn65dsi86_regmap_config);
@@ -1246,16 +1248,12 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
 		return PTR_ERR(pdata->regmap);
 	}
 
-	pdata->dev = dev;
-
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &pdata->panel, NULL);
 	if (ret) {
 		DRM_ERROR("could not find any panel node\n");
 		return ret;
 	}
 
-	dev_set_drvdata(dev, pdata);
-
 	pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
 	if (IS_ERR(pdata->enable_gpio)) {
 		DRM_ERROR("failed to get enable gpio from DT\n");
@@ -1287,8 +1285,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	i2c_set_clientdata(client, pdata);
-
 	pdata->aux.name = "ti-sn65dsi86-aux";
 	pdata->aux.dev = dev;
 	pdata->aux.transfer = ti_sn_aux_transfer;
-- 
2.31.1.368.gbe11c130af-goog