[PATCH 5.4 64/73] ARM: footbridge: fix PCI interrupt mapping

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>

[ Upstream commit 30e3b4f256b4e366a61658c294f6a21b8626dda7 ]

Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised.

Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/mach-footbridge/cats-pci.c      | 4 ++--
 arch/arm/mach-footbridge/ebsa285-pci.c   | 4 ++--
 arch/arm/mach-footbridge/netwinder-pci.c | 2 +-
 arch/arm/mach-footbridge/personal-pci.c  | 5 ++---
 4 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 0b2fd7e2e9b4..90b1e9be430e 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -15,14 +15,14 @@
 #include <asm/mach-types.h>
 
 /* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
+static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	return 0;
 }
 
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
 		return -1;	/* not a valid interrupt. */
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79..c3f280d08fa7 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -14,9 +14,9 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
+static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
 
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5..e8304392074b 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -18,7 +18,7 @@
  * We now use the slot ID instead of the device identifiers to select
  * which interrupt is routed where.
  */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 0:  /* host bridge */
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
index 4391e433a4b2..9d19aa98a663 100644
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ b/arch/arm/mach-footbridge/personal-pci.c
@@ -14,13 +14,12 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_personal_server[] __initdata = {
+static int irqmap_personal_server[] = {
 	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
 	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
 };
 
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
+static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char line;
 
-- 
2.30.2