Re: [PATCH v2 1/2] dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs

[Suman Anna]

Hi Rob,

On 3/27/21 9:31 AM, Suman Anna wrote:
> The K3 AM64x SoCs have two dual-core Arm R5F clusters/subsystems, with
> 2 R5F cores each, both in the MAIN voltage domain.
> 
> These clusters are a revised IP version compared to those present on
> J721E and J7200 SoCs, and supports a new "Single-CPU" mode instead of
> LockStep mode. Update the K3 R5F remoteproc bindings with the compatible
> info relevant to these R5F clusters/subsystems on K3 AM64x SoCs.
> 
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> ---
> v2: No changes
> 
>  .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  | 31 ++++++++++++++++---

Looks like this patch has fallen through the cracks, can you please review and
give your ack for this patch so that Bjorn can pick up the series for 5.13?

regards
Suman

>  1 file changed, 26 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
> index d905d614502b..130fbaacc4b1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
> @@ -14,8 +14,12 @@ description: |
>    processor subsystems/clusters (R5FSS). The dual core cluster can be used
>    either in a LockStep mode providing safety/fault tolerance features or in a
>    Split mode providing two individual compute cores for doubling the compute
> -  capacity. These are used together with other processors present on the SoC
> -  to achieve various system level goals.
> +  capacity on most SoCs. These are used together with other processors present
> +  on the SoC to achieve various system level goals.
> +
> +  AM64x SoCs do not support LockStep mode, but rather a new non-safety mode
> +  called "Single-CPU" mode, where only Core0 is used, but with ability to use
> +  Core1's TCMs as well.
>  
>    Each Dual-Core R5F sub-system is represented as a single DTS node
>    representing the cluster, with a pair of child DT nodes representing
> @@ -33,6 +37,7 @@ properties:
>        - ti,am654-r5fss
>        - ti,j721e-r5fss
>        - ti,j7200-r5fss
> +      - ti,am64-r5fss
>  
>    power-domains:
>      description: |
> @@ -56,11 +61,12 @@ properties:
>  
>    ti,cluster-mode:
>      $ref: /schemas/types.yaml#/definitions/uint32
> -    enum: [0, 1]
>      description: |
>        Configuration Mode for the Dual R5F cores within the R5F cluster.
> -      Should be either a value of 1 (LockStep mode) or 0 (Split mode),
> -      default is LockStep mode if omitted.
> +      Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
> +      most SoCs (AM65x, J721E, J7200), default is LockStep mode if omitted;
> +      and should be either a value of 0 (Split mode) or 2 (Single-CPU mode)
> +      on AM64x SoCs, default is Split mode if omitted.
>  
>  # R5F Processor Child Nodes:
>  # ==========================
> @@ -97,6 +103,7 @@ patternProperties:
>            - ti,am654-r5f
>            - ti,j721e-r5f
>            - ti,j7200-r5f
> +          - ti,am64-r5f
>  
>        reg:
>          items:
> @@ -198,6 +205,20 @@ patternProperties:
>  
>      unevaluatedProperties: false
>  
> +if:
> +  properties:
> +    compatible:
> +      enum:
> +        - ti,am64-r5fss
> +then:
> +  properties:
> +    ti,cluster-mode:
> +      enum: [0, 2]
> +else:
> +  properties:
> +    ti,cluster-mode:
> +      enum: [0, 1]
> +
>  required:
>    - compatible
>    - power-domains
>