[PATCH v3 0/2] TJA1103 driver

[Radu Pirea (NXP OSS)]

Hi,

This small series adds the TJA1103 PHY driver.

Changes in v3:
 - use phy_read_mmd_poll_timeout instead of spin_until_cond
 - changed the phy name from a generic one to something specific
 - minor indentation change

Changes in v2:
 - implemented genphy_c45_pma_suspend/genphy_c45_pma_suspend
 - set default internal delays set to 2ns(90 degrees)
 - added "VEND1_" prefix to the register definitions
 - disable rxid in case of txid
 - disable txid in case of rxid
 - disable internal delays in rgmii mode
 - reduced max line length to 80 characters
 - rebased on top of net-next/master
 - use genphy_c45_loopback as .set_loopback callback
 - renamed the driver from nxp-c45 to nxp-c45-tja11xx
 - used phy phy_set_bits_mmd/phy_clear_bits_mmd instead on phy_write_mmd where
 I had to set/clear one bit.

Radu Pirea (NXP OSS) (2):
  net: phy: add genphy_c45_pma_suspend/resume
  phy: nxp-c45: add driver for tja1103

 MAINTAINERS                       |   6 +
 drivers/net/phy/Kconfig           |   6 +
 drivers/net/phy/Makefile          |   1 +
 drivers/net/phy/nxp-c45-tja11xx.c | 588 ++++++++++++++++++++++++++++++
 drivers/net/phy/phy-c45.c         |  43 +++
 include/linux/phy.h               |   2 +
 6 files changed, 646 insertions(+)
 create mode 100644 drivers/net/phy/nxp-c45-tja11xx.c


base-commit: 5b489fea977c2b23e26e2f630478da0f4bfdc879
-- 
2.31.1