[PATCH 4/6] staging: media: atomisp: reformat code comment blocks

[Deepak R Varma]

Reformat code comment blocks according to the coding style guidelines.
This resolves different checkpatch script WARNINGs around block comments.

Signed-off-by: Deepak R Varma <drv@xxxxxxxxx>
---
 .../media/atomisp/i2c/atomisp-gc2235.c        |  8 +++----
 .../atomisp/i2c/atomisp-libmsrlisthelper.c    |  3 ++-
 .../media/atomisp/i2c/atomisp-mt9m114.c       | 22 +++++++++++--------
 .../media/atomisp/i2c/atomisp-ov2680.c        |  3 ++-
 4 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
index 548c572d3b57..a585d73665a6 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
@@ -747,10 +747,10 @@ static int startup(struct v4l2_subdev *sd)
 
 	if (is_init == 0) {
 		/* force gc2235 to do a reset in res change, otherwise it
-		* can not output normal after switching res. and it is not
-		* necessary for first time run up after power on, for the sack
-		* of performance
-		*/
+		 * can not output normal after switching res. and it is not
+		 * necessary for first time run up after power on, for the sack
+		 * of performance
+		 */
 		power_down(sd);
 		power_up(sd);
 		gc2235_write_reg_array(client, gc2235_init_settings);
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
index b93c80471f22..750b3484eb19 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
@@ -57,7 +57,8 @@ static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr,
 	 * By convention, the first two bytes of actual data should be
 	 * understood as an address in the sensor address space (hibyte
 	 * followed by lobyte) where the remaining data in the sequence
-	 * will be written. */
+	 * will be written.
+	 */
 
 	u8 *ptr = bufptr;
 
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
index 465fc4468442..160bb58ce708 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
@@ -478,7 +478,8 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
 	/* Note: current modules wire only one GPIO signal (RESET#),
 	 * but the schematic wires up two to the connector.  BIOS
 	 * versions have been unfortunately inconsistent with which
-	 * ACPI index RESET# is on, so hit both */
+	 * ACPI index RESET# is on, so hit both
+	 */
 
 	if (flag) {
 		ret = dev->platform_data->gpio0_ctrl(sd, 0);
@@ -1019,8 +1020,8 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 		dev->first_gain = AnalogGain;
 		dev->first_diggain = DigitalGain;
 	}
-	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +
-	((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */
+	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +		*/
+	/* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8);	*/
 
 	/* set frame length */
 	if (FLines < coarse_integration + 6)
@@ -1035,7 +1036,8 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 
 	/* set coarse integration */
 	/* 3A provide real exposure time.
-		should not translate to any value here. */
+	 * should not translate to any value here.
+	 */
 	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
 				REG_EXPO_COARSE, (u16)(coarse_integration));
 	if (ret) {
@@ -1044,7 +1046,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	}
 
 	/*
-	// set analog/digital gain
+	 * set analog/digital gain
 	switch(AnalogGain)
 	{
 	case 0:
@@ -1069,8 +1071,9 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	*/
 	if (DigitalGain >= 16 || DigitalGain <= 1)
 		DigitalGain = 1;
-	/* AnalogGainToWrite =
-		(u16)((DigitalGain << 12) | AnalogGainToWrite); */
+
+	/* AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite);
+	 */
 	AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain);
 	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
 				REG_GAIN, AnalogGainToWrite);
@@ -1096,7 +1099,8 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 }
 
 /* This returns the exposure time being used. This should only be used
-   for filling in EXIF data, not for actual image processing. */
+ * for filling in EXIF data, not for actual image processing.
+ */
 static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -1297,7 +1301,7 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val)
 
 /* Fake interface
  * mt9m114 now can not support 3a_lock
-*/
+ */
 static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val)
 {
 	aaalock = val;
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index c17615149f46..91dca275a08e 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -732,7 +732,8 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
 	 * existing integrations often wire two (reset/power_down)
 	 * because that is the way other sensors work.  There is no
 	 * way to tell how it is wired internally, so existing
-	 * firmwares expose both and we drive them symmetrically. */
+	 * firmwares expose both and we drive them symmetrically.
+	 */
 	if (flag) {
 		ret = dev->platform_data->gpio0_ctrl(sd, 1);
 		usleep_range(10000, 15000);
-- 
2.25.1