[PATCH 0/4] Reinstate and improve MIPS `do_div' implementation

[Maciej W. Rozycki]

Hi,

 As Huacai has recently discovered the MIPS backend for `do_div' has been 
broken and inadvertently disabled with commit c21004cd5b4c ("MIPS: Rewrite 
<asm/div64.h> to work with gcc 4.4.0.").  As it is code I have originally 
written myself and Huacai had issues bringing it back to life leading to a 
request to discard it even I have decided to step in.

 In the end I have fixed the code and measured its performance to be ~100% 
better on average than our generic code.  I have decided it would be worth 
having the test module I have prepared for correctness evaluation as well 
as benchmarking, so I have included it with the series, also so that I can 
refer to the results easily.

 In the end I have included four patches on this occasion: 1/4 is the test 
module, 2/4 is an inline documentation fix/clarification for the `do_div' 
wrapper, 3/4 enables the MIPS `__div64_32' backend and 4/4 adds a small 
performance improvement to it.

 I have investigated a fifth change as a potential improvement where I 
replaced the call to `do_div64_32' with a DIVU instruction for cases where 
the high part of the intermediate divident is zero, but it has turned out 
to regress performance a little, so I have discarded it.

 Also a follow-up change might be worth having to reduce the code size and 
place `__div64_32' out of line for CC_OPTIMIZE_FOR_SIZE configurations, 
but I have not fully prepared such a change at this time.  I did use the 
WIP form I have for performance evaluation however; see the figures quoted 
with 4/4.

 These changes have been verified with a DECstation system with an R3400 
MIPS I processor @40MHz and a MTI Malta system with a 5Kc MIPS64 processor 
@160MHz.

 See individual change descriptions and any additional discussions for
further details.

 Questions, comments or concerns?  Otherwise please apply.

  Maciej