[PATCH 0/5]misc: Add afi config drivers support.

[Nava kishore Manne]

Xilinx SoC platforms (Zynq and ZynqMP) connect the PS to the
programmable logic (PL) through the AXI port.This AXI port helps
to establish the data path between the PS and PL. In-order to
establish to proper communication data path between PS and PL
the AXI port data path should be configured with the proper
Bus-width values

This patch series Adds afi config drivers support to handle the
PS-PL AXI port bus-width configurations.

Nava kishore Manne (5):
  misc: doc: Add binding doc for the afi config driver
  misc: zynq: Add afi config driver
  firmware: xilinx: Add afi ioctl support
  misc: doc: Add binding doc for the zynqmp afi config driver
  misc: zynqmp: Add afi config driver

 .../bindings/misc/xlnx,zynq-afi-fpga.yaml     |  47 ++++++
 .../bindings/misc/xlnx,zynqmp-afi-fpga.yaml   | 136 ++++++++++++++++++
 drivers/firmware/xilinx/zynqmp.c              |  13 ++
 drivers/misc/Kconfig                          |  22 +++
 drivers/misc/Makefile                         |   2 +
 drivers/misc/zynq-afi.c                       |  81 +++++++++++
 drivers/misc/zynqmp-afi.c                     |  83 +++++++++++
 include/linux/firmware/xlnx-zynqmp.h          |   7 +
 8 files changed, 391 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,zynq-afi-fpga.yaml
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,zynqmp-afi-fpga.yaml
 create mode 100644 drivers/misc/zynq-afi.c
 create mode 100644 drivers/misc/zynqmp-afi.c

-- 
2.18.0